SpaceBridge comprehensive TODO list: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
* make outline of how things fit into the compartments | * make outline of how things fit into the compartments | ||
* enlarge hole for video camera so that there is not plastics in the field of view | * enlarge hole for video camera so that there is not plastics in the field of view | ||
*mount canon camera to faceplate | * mount canon camera to faceplate | ||
* X prepare new Y adapter (done, although the pins have to be bent a bit | |||
for safe contact!) | for safe contact!) | ||
* assemble the antenna for GPRS | |||
* antenna for video | |||
-> Best thing it to just have the transmitter and the antenna inside one of | -> Best thing it to just have the transmitter and the antenna inside one of | ||
the compartments | the compartments | ||
* assemble GPRS GPS tracking system (details only known to Brian etc.) | |||
* assemble/mount phone | |||
* connect blinking circuit to the three position lights | |||
* have Mark have a look at the circuit | |||
* mount battery holders | |||
-> Finding about blinking circuit: It is just switching on/off two fully | -> Finding about blinking circuit: It is just switching on/off two fully | ||
charged AA cells and is certainly not the best way to do it. All three LEDs | charged AA cells and is certainly not the best way to do it. All three LEDs | ||
on the payload are connected in parallel. | on the payload are connected in parallel. | ||
* isolate intervalometer electrically | |||
* maybe buy Kapton tape(?) | |||
* buy velcro for mounting electronics in box | |||
* buy helium tank | |||
* mount video equipment | |||
* mount 12V power supply | |||
* fix the position of the video camera (needs to get into launch checklist!) | |||
2x cinch male-male adapters | * 2x cinch male-male adapters | ||
* glue plastic sheets that came loose | |||
* charge video battery fully and measure full voltage | |||
* replace batteries in blinker before launch (shorting) | |||
* replace canon camera battery | |||
* put this list onto the wiki, also the launch prep check list | |||
* access list | |||
* put failed minimal launch data (track on google maps etc.) onto the wiki |
Revision as of 17:02, 17 July 2011
- make outline of how things fit into the compartments
- enlarge hole for video camera so that there is not plastics in the field of view
- mount canon camera to faceplate
- X prepare new Y adapter (done, although the pins have to be bent a bit
for safe contact!)
- assemble the antenna for GPRS
- antenna for video
-> Best thing it to just have the transmitter and the antenna inside one of the compartments
- assemble GPRS GPS tracking system (details only known to Brian etc.)
- assemble/mount phone
- connect blinking circuit to the three position lights
* have Mark have a look at the circuit * mount battery holders -> Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel.
- isolate intervalometer electrically
- maybe buy Kapton tape(?)
- buy velcro for mounting electronics in box
- buy helium tank
- mount video equipment
- mount 12V power supply
- fix the position of the video camera (needs to get into launch checklist!)
- 2x cinch male-male adapters
- glue plastic sheets that came loose
- charge video battery fully and measure full voltage
- replace batteries in blinker before launch (shorting)
- replace canon camera battery
- put this list onto the wiki, also the launch prep check list
- access list
- put failed minimal launch data (track on google maps etc.) onto the wiki