SpaceBridge comprehensive TODO list

From Noisebridge
(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
 
* make outline of how things fit into the compartments
 
* make outline of how things fit into the compartments
 
* enlarge hole for video camera so that there is not plastics in the field of view
 
 
* mount canon camera to faceplate
 
* mount canon camera to faceplate
 
* X prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)
 
* X prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)
Line 25: Line 23:
 
* replace batteries in blinker before launch (shorting)
 
* replace batteries in blinker before launch (shorting)
 
* replace canon camera battery
 
* replace canon camera battery
* put this list onto the wiki, also the launch prep check list
 
* access list
 
 
* put failed minimal launch data (track on google maps etc.) onto the wiki
 
* put failed minimal launch data (track on google maps etc.) onto the wiki
 +
 +
Completed tasks:
 +
* enlarge hole for video camera so that there is not plastics in the field of view
 +
* put this list onto the wiki, also the launch prep check list

Revision as of 17:18, 17 July 2011

  • make outline of how things fit into the compartments
  • mount canon camera to faceplate
  • X prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)
  • assemble the antenna for GPRS
  • antenna for video
  • Best thing it to just have the transmitter and the antenna inside one of the compartments
  • assemble GPRS GPS tracking system (details only known to Brian etc.)
  • assemble/mount phone
  • connect blinking circuit to the three position lights
    • have Mark have a look at the circuit
    • mount battery holders
    • Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel.
  • isolate intervalometer electrically
  • maybe buy Kapton tape(?)
  • buy velcro for mounting electronics in box
  • buy helium tank
  • mount video equipment
  • mount 12V power supply
  • fix the position of the video camera (needs to get into launch checklist!)
  • 2x cinch male-male adapters
  • glue plastic sheets that came loose
  • charge video battery fully and measure full voltage
  • replace batteries in blinker before launch (shorting)
  • replace canon camera battery
  • put failed minimal launch data (track on google maps etc.) onto the wiki

Completed tasks:

  • enlarge hole for video camera so that there is not plastics in the field of view
  • put this list onto the wiki, also the launch prep check list
Personal tools