SpaceBridge comprehensive TODO list

From Noisebridge
(Difference between revisions)
Jump to: navigation, search
 
(10 intermediate revisions by 3 users not shown)
Line 1: Line 1:
* make outline of how things fit into the compartments                                                                                        
+
== TODO ==
* enlarge hole for video camera so that there is not plastics in the field of view                                                                                                                                   
+
* make outline of how things fit into the compartments
* mount canon camera to faceplate                                                                                                             
+
 
* X prepare new Y adapter (done, although the pins have to be bent a bit                                                                 
+
* assemble the antenna for GPRS
for safe contact!)                                                                                                                           
+
 
* assemble the antenna for GPRS                                                                                                              
+
* antenna for video
* antenna for video                                                                                                                          
+
** Best thing is to just have the transmitter and the antenna inside one of the compartments
  -> Best thing it to just have the transmitter and the antenna inside one of                                                                
+
 
  the compartments                                                                                                                            
+
* assemble GPRS GPS tracking system (details only known to Brian etc.)
* assemble GPRS GPS tracking system (details only known to Brian etc.)                                                                        
+
 
* assemble/mount phone                                                                                                                        
+
* assemble and mount phone
* connect blinking circuit to the three position lights                                                                                      
+
 
  * have Mark have a look at the circuit                                                                                                    
+
* connect blinking circuit to the three position lights
  * mount battery holders                                                                                                                    
+
** have Mark have a look at the circuit
  -> Finding about blinking circuit: It is just switching on/off two fully                                                                    
+
** mount battery holders
  charged AA cells and is certainly not the best way to do it. All three LEDs
+
** Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel.
  on the payload are connected in parallel.
+
 
 
* isolate intervalometer electrically
 
* isolate intervalometer electrically
 +
 
* maybe buy Kapton tape(?)
 
* maybe buy Kapton tape(?)
 +
 
* buy velcro for mounting electronics in box
 
* buy velcro for mounting electronics in box
 +
 
* buy helium tank
 
* buy helium tank
 +
 
* mount video equipment
 
* mount video equipment
 +
 
* mount 12V power supply
 
* mount 12V power supply
 +
 
* fix the position of the video camera (needs to get into launch checklist!)
 
* fix the position of the video camera (needs to get into launch checklist!)
 +
 
* 2x cinch male-male adapters
 
* 2x cinch male-male adapters
 +
 
* glue plastic sheets that came loose
 
* glue plastic sheets that came loose
 +
 
* charge video battery fully and measure full voltage
 
* charge video battery fully and measure full voltage
 +
 
* replace batteries in blinker before launch (shorting)
 
* replace batteries in blinker before launch (shorting)
 +
 
* replace canon camera battery
 
* replace canon camera battery
* put this list onto the wiki, also the launch prep check list
+
 
* access list
+
 
* put failed minimal launch data (track on google maps etc.) onto the wiki
 
* put failed minimal launch data (track on google maps etc.) onto the wiki
 +
 +
* put callsign and "if found, please call XXX" onto the unit
 +
 +
* weight completed payload
 +
 +
* buy/find lithium batteries for:
 +
** D cell for light
 +
** AA's for LEDs
 +
**lithium 9v for tracker
 +
 +
== Completed Tasks ==
 +
* enlarge hole for video camera so that there is not plastics in the field of view
 +
 +
* put this list onto the wiki, also the launch prep check list
 +
 +
* mount canon camera to faceplate
 +
 +
* prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)

Latest revision as of 19:08, 17 July 2011

[edit] TODO

  • make outline of how things fit into the compartments
  • assemble the antenna for GPRS
  • antenna for video
    • Best thing is to just have the transmitter and the antenna inside one of the compartments
  • assemble GPRS GPS tracking system (details only known to Brian etc.)
  • assemble and mount phone
  • connect blinking circuit to the three position lights
    • have Mark have a look at the circuit
    • mount battery holders
    • Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel.
  • isolate intervalometer electrically
  • maybe buy Kapton tape(?)
  • buy velcro for mounting electronics in box
  • buy helium tank
  • mount video equipment
  • mount 12V power supply
  • fix the position of the video camera (needs to get into launch checklist!)
  • 2x cinch male-male adapters
  • glue plastic sheets that came loose
  • charge video battery fully and measure full voltage
  • replace batteries in blinker before launch (shorting)
  • replace canon camera battery
  • put failed minimal launch data (track on google maps etc.) onto the wiki
  • put callsign and "if found, please call XXX" onto the unit
  • weight completed payload
  • buy/find lithium batteries for:
    • D cell for light
    • AA's for LEDs
    • lithium 9v for tracker

[edit] Completed Tasks

  • enlarge hole for video camera so that there is not plastics in the field of view
  • put this list onto the wiki, also the launch prep check list
  • mount canon camera to faceplate
  • prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)
Personal tools