SpaceBridge comprehensive TODO list: Difference between revisions
Jump to navigation
Jump to search
Marcus10110 (talk | contribs) No edit summary |
Marcus10110 (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
* make outline of how things fit into the compartments | * make outline of how things fit into the compartments | ||
* mount canon camera to faceplate | * mount canon camera to faceplate | ||
* X prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!) | * X prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!) | ||
| Line 25: | Line 23: | ||
* replace batteries in blinker before launch (shorting) | * replace batteries in blinker before launch (shorting) | ||
* replace canon camera battery | * replace canon camera battery | ||
* put failed minimal launch data (track on google maps etc.) onto the wiki | |||
Completed tasks: | |||
* enlarge hole for video camera so that there is not plastics in the field of view | |||
* put this list onto the wiki, also the launch prep check list | * put this list onto the wiki, also the launch prep check list | ||
Revision as of 17:18, 17 July 2011
- make outline of how things fit into the compartments
- mount canon camera to faceplate
- X prepare new Y adapter (done, although the pins have to be bent a bit for safe contact!)
- assemble the antenna for GPRS
- antenna for video
- Best thing it to just have the transmitter and the antenna inside one of the compartments
- assemble GPRS GPS tracking system (details only known to Brian etc.)
- assemble/mount phone
- connect blinking circuit to the three position lights
- have Mark have a look at the circuit
- mount battery holders
- Finding about blinking circuit: It is just switching on/off two fully charged AA cells and is certainly not the best way to do it. All three LEDs on the payload are connected in parallel.
- isolate intervalometer electrically
- maybe buy Kapton tape(?)
- buy velcro for mounting electronics in box
- buy helium tank
- mount video equipment
- mount 12V power supply
- fix the position of the video camera (needs to get into launch checklist!)
- 2x cinch male-male adapters
- glue plastic sheets that came loose
- charge video battery fully and measure full voltage
- replace batteries in blinker before launch (shorting)
- replace canon camera battery
- put failed minimal launch data (track on google maps etc.) onto the wiki
Completed tasks:
- enlarge hole for video camera so that there is not plastics in the field of view
- put this list onto the wiki, also the launch prep check list