Editing Talk:Laser Cutter/Full Spectrum Laser 40W

Jump to navigation Jump to search
Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 1: Line 1:
I picked up some Masonite for use in the laser cutter. It works well for raster engraving, but it's too dense for vector; multiple passes didn't come close to cutting through the material.
I wasn't sure where to put this on the main page, since it looks like Masonite is totally suitable for raster and totally unsuitable for vector.
----
Glenn from Dallas Makerspace again.
For a fire extinguisher we use a 9 oz paintball CO2 tank with one of these nozzles from Ebay works great and its cheap to fill at any sporting goods store that sells paintball stuff. The tank costs about $12, the nozzle about $14 and to fill is $3.
[http://cgi.ebay.com/Paintball-CO2-Tank-Air-Blow-Off-Duster-Adapter-NEW-FS-/380314159488?pt=LH_DefaultDomain_0&hash=item588c7d8980 CO2 nozzle]
----
FYI from Dallas Makerspace 2/25/11
FYI from Dallas Makerspace 2/25/11


Please note that all contributions to Noisebridge are considered to be released under the Creative Commons Attribution-NonCommercial-ShareAlike (see Noisebridge:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

To protect the wiki against automated edit spam, we kindly ask you to solve the following CAPTCHA:

Cancel Editing help (opens in new window)