Talk:RepRap

From Noisebridge
Revision as of 07:52, 21 October 2008 by Turkshead (talk | contribs) (New page: I like the McWire, as it is designed for both milling and printing, is cheap, has the smaller and simpler parts list (as compared to the Darwin machine), seems to be the easier / faster of...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

I like the McWire, as it is designed for both milling and printing, is cheap, has the smaller and simpler parts list (as compared to the Darwin machine), seems to be the easier / faster of the two, and uses 3/4" steel plumber's pipe as the primary structural component, which I have an aesthetic weakness for.

I don't have a particular preference based on which finished machine will be better or worse; if anybody has insight, I welcome it, otherwise I'm going to start going down the McWire BOM and obtaining parts.

Turkshead 07:52, 21 October 2008 (PDT)

Retrieved from "https://www.noisebridge.net/index.php?title=Talk:RepRap&oldid=1779"