Difference between revisions of "User:Hzeller"
JeffreyATW (talk | contribs) |
|||
| (10 intermediate revisions by 5 users not shown) | |||
| Line 1: | Line 1: | ||
| − | [https://plus.google.com/+HennerZeller/posts | + | [https://github.com/hzeller on Github]; [https://plus.google.com/+HennerZeller/posts on G+] |
| − | Software hacker (C, C++), Hardware hacker (mostly Atmel microcontrollers, next step FPGAs). Have a CNC machine | + | |
| + | Software hacker (C, C++), Hardware hacker (mostly general digital electronics, Atmel microcontrollers, next step will be FPGAs). Have a CNC machine at home operating with my [https://github.com/hzeller/beagleg own motor controller software] | ||
A little bit of woodworking (building my own furniture). | A little bit of woodworking (building my own furniture). | ||
Espresso addict. | Espresso addict. | ||
| − | I like to play with LEDs https:// | + | I like to play with LEDs<br/> |
| + | like writing this [https://github.com/hzeller/rpi-rgb-led-matrix rpi-rgb-led-matrix software] to control cheap RGB LED matrices with the Raspberry Pi (http://youtu.be/ZglGuMaKvpY)<br/> | ||
| + | .. or was involved in the [https://twitter.com/noisebridge/status/734451170090049536 award winning] Noisebridge [[Flaschen_Taschen]] (Code [https://github.com/hzeller/flaschen-taschen here])<br/> | ||
| + | .. or the resulting http://spixels.org/ code and PCB to control up to 16 SPI RGB LED strips. | ||
| − | One of my current projects is to build a controller for 3D printers | + | One of my current projects is to build a controller for 3D printers, CNC machines and laser cutters: The [https://github.com/hzeller/beagleg BeagleG software] and a [https://github.com/hzeller/bumps cape] for the Beaglebone Black. |
| − | + | Useful for making PCBs is my [http://ldgraphy.org/ LDGraphy] project. There is also of [https://www.youtube.com/watch?v=G9-JK2Nc7w0 a video of it in action]. | |
| − | I | + | For Noisebridge I made the [https://github.com/hzeller/rfid-access-control RFID reader system] that gets you into Noisebridge. |
| − | + | Also a running Noisebridge project is the [https://github.com/hzeller/stuff-org electronic parts organization tool]: https://parts.noisebridge.net/ | |
| − | |||
| − | + | Here are some pictures I took at the [https://www.flickr.com/photos/hzeller/sets/72157631076753012/ Noisebridge Toorcamp tour 2012] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | {{ActiveUsers}} | |
Latest revision as of 06:08, 29 September 2019
Software hacker (C, C++), Hardware hacker (mostly general digital electronics, Atmel microcontrollers, next step will be FPGAs). Have a CNC machine at home operating with my own motor controller software
A little bit of woodworking (building my own furniture).
Espresso addict.
I like to play with LEDs
like writing this rpi-rgb-led-matrix software to control cheap RGB LED matrices with the Raspberry Pi (http://youtu.be/ZglGuMaKvpY)
.. or was involved in the award winning Noisebridge Flaschen_Taschen (Code here)
.. or the resulting http://spixels.org/ code and PCB to control up to 16 SPI RGB LED strips.
One of my current projects is to build a controller for 3D printers, CNC machines and laser cutters: The BeagleG software and a cape for the Beaglebone Black.
Useful for making PCBs is my LDGraphy project. There is also of a video of it in action.
For Noisebridge I made the RFID reader system that gets you into Noisebridge. Also a running Noisebridge project is the electronic parts organization tool: https://parts.noisebridge.net/
Here are some pictures I took at the Noisebridge Toorcamp tour 2012
|
This user is an Active User. | Edit |