[Build] New to noisebridge and looking to build
jim at well.com
Tue Oct 20 08:08:16 PDT 2009
some parts are there (most, i think). the general
rule prefers donations (e.g. for library shelves
steve, lamont, and i each pledged $40, though the
cost is greater--i'm hoping they'll each chip in 1/3
the overage, and we're reusing the 2x4 scraps that
are around). electrical was budgeted, hence i'm
expecting reimbursement within budget.
On Mon, 2009-10-19 at 21:14 -0700, Aaron Stone wrote:
> Thanks for the brain dump of things to work on! I'll put some noisebot
> time into my schedule this week and use your list to do a walkaround
> triage of what I can help with.
> Are the parts for these projects all bought already? If not, is there
> a reimbursement fund or is it on a donation basis by whomever makes
> the hardware store run?
> On Thu, Oct 15, 2009 at 9:43 PM, jim <jim at well.com> wrote:
> > there is no schedule. people do what they can (or
> > please) when they can.
> > one burning need is for storage. seems to me the
> > stuff in the turing classroom is of three categories:
> > computer stuff, construction stuff, and the flat
> > screen stuff (on the table near the door).
> > getting the computer stuff and the construction
> > stuff off the tables makes the room useable.
> > places to put the stuff include near the big rack
> > and other computer stuff near the fridge (for the
> > computer stuff) as well as along the wall that
> > divides the classrooms from the central walkway space
> > (for the construction stuff). leave the flat screen
> > stuff where it is for now.
> > look at the construction of the shelves in the
> > storage closet and build another one or two shelves.
> > i've got the hang of it, so just as well leave it
> > for me--i'll get to it fast.
> > there's paint and electrical fittings in the
> > storage closet.
> > against the west windows are planks for the book
> > shelves. cut 2x4s in 12 inch lengths (nice and
> > straight cuts, use the radial saw) for supports for
> > the shelves. there are a few heavy cardboard
> > wardrobe boxes to be used as backing (smear glue on
> > the rear edges of the wood then staple or nail the
> > cardboard onto the glued surfaces). there are
> > various nails and glue and various tees and angle
> > braces in the closet next to the electronics area.
> > the sub-panel on the south wall (west end) should
> > power the lights and receptacles for the electronics
> > area, storage closet, and darkroom. the light fixtures
> > above the electronics area should get powered from
> > the sub-panel and switched from a column on the south
> > wall (look at tape tags on the south wall). bring pipe
> > up from the sub-panel to the ceiling and then branch
> > to the various locations (there's my bender in the
> > storage closet.
> > wire up the receptacles on the west wall. they get
> > power from the sub-panel on the north wall (near the
> > elevator room).
> > in the middle of the north wall in the turing
> > classroom, near the floor, is a box with wires sticking
> > out. leave it alone till i group the red-black-white
> > wires. then it'll be ready for provide power for lights
> > in the dirty workshop, turing classroom, and church
> > classroom as well as receptacles in the turing and
> > church classrooms.
> > the sub-panel in the dirty workshop provides power
> > for receptacles in the dirty workshop. use singles for
> > dedicated machines; use duplexes for handtools.
> > send me email off-list and we can coordinate a
> > little better.
> > jim
> > On Thu, 2009-10-15 at 20:48 -0700, Aaron Stone wrote:
> >> I just discovered noisebridge at the new space anniversary party two
> >> weeks ago. I'd like to come help build out the space!
> >> I'm handy with electrical, plumbing, and carpentry. I want to learn
> >> Forth, fire dancing, and darkroom photo developing.
> >> Are there scheduled build days I can jump into?
> >> Cheers,
> >> Aaron
> >> _______________________________________________
> >> Build mailing list
> >> Build at lists.noisebridge.net
> >> https://www.noisebridge.net/mailman/listinfo/build
More information about the Build