[Build] [Noisebridge-discuss] Kitchen update

Zedd Epstein zedd.00 at gmail.com
Sun Mar 7 01:41:09 PST 2010


Thank you so much! I'll try and get in and pull it tomorrow, if I don't make
it, I'll be in Monday, and we'll have hot water!

On Sun, Mar 7, 2010 at 1:37 AM, Ian Atha <thatha at thatha.org> wrote:

> The one you started. I modified the orientation of the last part you
> installed because I couldn't figure out your intentions.
>
> On Sun, Mar 7, 2010 at 01:28, Zedd Epstein <zedd.00 at gmail.com> wrote:
> > Thank You!!!!!!!!!!!one!!!!!!!!!!!!eleventyone11111!!!!!!!!!!!Did you
> finish
> > the conduit I started earlier today, or did you run a new one?
> >
> > Zedd
> >
> > On Sun, Mar 7, 2010 at 1:19 AM, Ian Atha <thatha at thatha.org> wrote:
> >>
> >> Conduit installed. Currently not bound to water heater to make pulling
> >> wire easier.
> >>
> >> Didn't manage to pull the wire, but fishtape and wires are there,
> waiting
> >> for someone who can wrap wires around fish tape and pull/push.
> >>
> >> Conduit also needs to be bound to ceiling.
> >>
> >> I just remembered that I forgot to turn on the kitchen circuitbreakers
> >> before leaving and I am too beat to go back.
> >>
> >> On Mar 2, 2010 1:45 PM, "Zedd Epstein" <zedd.00 at gmail.com> wrote:
> >>
> >> Copper is all in. We need a red and a black 8 or 10 guage wire ran to
> it,
> >> then we have hot water. Power and a switch need to be run to the garbage
> >> disposal. We also need power ran to the microwave cabinet above the
> >> dishwasher, then down to the dishwasher.
> >>
> >> I should be there around 4 to try and help with what I can, and
> pressurize
> >> the hot water to make sure it doesn't leak.
> >>
> >> Zedd
> >>
> >> _______________________________________________
> >> Noisebridge-discuss mailing list
> >> Noisebridge-discuss at lists.noisebridge.net
> >> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
> >>
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.noisebridge.net/pipermail/build/attachments/20100307/0f7f5b6a/attachment.htm 


More information about the Build mailing list