[Darkroom] Canon DSL
joachimp at gmail.com
Thu Oct 7 12:06:06 PDT 2010
I have a canon s3 IS 'point and shoot' which I've removed the bandpass filter.
The only really important part is making sure that it has a mode where
you can manually set the white balance and/or RAW shooting
capability. If you can't fit an external vis/UV blocking filter, due
to lacking filter threads, you might want to consider finding some r72
filter glass to install in front of the sensor.
On Thu, Oct 7, 2010 at 11:59, T Crane <tristancrane at gmail.com> wrote:
> If we do have a camera hacking day, I'd be down to participate. Does it have
> to be a DSLR, or can you remove the filter on smaller point and shoots? I
> have a minolta and I'd be down to take apart.
> On Mon, Oct 4, 2010 at 4:22 PM, Mike Estee <mikest at gmail.com> wrote:
>> you'll want a dust free clean room. rubber dust free gloves, a face mask
>> (breathing kicks up dust) and a lot of patience.
>> I have a ir converted rebel xt. its nice. a UV mode one would be fun to
>> play with.
>> I have an 800nm filter on it. in retrospect, I think a 1000nm filter would
>> have been more interesting.
>> also, replacing the filter on the metering sensor really helps with
>> getting good pictures. or so I've heard
>> out of an abusive relationship with technology since 2010
>> On Oct 4, 2010, at 2:47 PM, Rubin Abdi <rubin at starset.net> wrote:
>> > I've dropped off two batteries and a charger for it. I've got a
>> > crapshoot lens at home I'll donate also.
>> > So anyone have any experience with this whole removing the IR filter
>> > thing?
>> > --
>> > Rubin Abdi
>> > rubin at starset.net
>> > _______________________________________________
>> > Darkroom mailing list
>> > Darkroom at lists.noisebridge.net
>> > https://www.noisebridge.net/mailman/listinfo/darkroom
>> Darkroom mailing list
>> Darkroom at lists.noisebridge.net
> Darkroom mailing list
> Darkroom at lists.noisebridge.net
More information about the Darkroom