[Darkroom] State of the room?

Kelly hurtstotouchfire at gmail.com
Sat Sep 4 11:51:46 PDT 2010


So, what of it? Who else is down?

Probably just Lilia and I could make some progress, but it'd be nice to have
1 or 2 more.

Sat or Sun?

-Kelly

On Fri, Sep 3, 2010 at 18:06, Lilia Markham <liliakai at gmail.com> wrote:

> >It's definitely time for a work day. I'm free this weekend.
>
> me too!
>
>
> On Fri, Sep 3, 2010 at 6:01 PM, Kelly <hurtstotouchfire at gmail.com> wrote:
>
>> It's definitely time for a work day. I'm free this weekend.
>>
>> Last I checked, none of the shelf-like boards in the shop were sufficient
>> for the shelves. There was some pressed board but not large, flat plywood.
>> We can check again though. There might also be some dimensions issues, I
>> forget.
>>
>> >Also I found a 64" 2x4 in the pile of wood in the woodshop area and
>> stashed it in the darkroom too. One of its long edges is sorta sheared off
>> but it seems like it'll work.
>>
>> I think I know the one you mean. We might have sheared it when we were
>> making the sink stand actually. Anyway, yeah it should be fine.
>>
>> -K
>>
>>
>> On Fri, Sep 3, 2010 at 17:04, Lilia Markham <liliakai at gmail.com> wrote:
>>
>>> Acquired: 8 12"x14" shelf brackets, two door hinges, and one big hook and
>>> eye set for a latch. Couldn't find black though, srry. :-/ They're in an ace
>>> hardware bag in the d'room.
>>>
>>> Also I found a 64" 2x4 in the pile of wood in the woodshop area and
>>> stashed it in the darkroom too. One of its long edges is sorta sheared off
>>> but it seems like it'll work. There are plenty of boards there that we could
>>> cut into shelves too.
>>>
>>> Maybe its time for a work day soon?
>>>
>>> On Sep 3, 2010 2:12 PM, "Kelly" <hurtstotouchfire at gmail.com> wrote:
>>> The starred items are ones I don't know how to do myself. Everything else
>>> I have designed and spec-ed out on graph paper.
>>>
>>> Here's the agenda:
>>>
>>> -Install 2 levels of shelving above the sink using L brackets. (2 of 15"
>>> x 52" plywood) Second shelf should be reinforced sufficiently to support the
>>> countertop in it's backsplash position.
>>>
>>> -Cut down MDF/laminate tabletop that is currently on sink (dimensions not
>>> accessible at this moment, can brief someone later) to make a countertop to
>>> go over the long sink well.
>>>
>>> -Build hinge base for countertop (using a 2x4 and door hinges)
>>>
>>> -Install hooks for countertop to bottom shelf
>>>
>>> *-Design and construct some place to mount the faucet and temperature
>>> controller filters
>>>
>>> *-Figure out wtf is up with those temp control units (only Joachim seemed
>>> to grok them at all)
>>>
>>> *-Hook up sink faucets & drain (plumbing is done)
>>>
>>> -Build more stable tables for the enlargers. Should be 2 sep tables, both
>>> with space underneath for the rolling stool/bench thingies, which have
>>> storage and are awesome.
>>>
>>> Shopping list:
>>> 2 of 15" x 52" plywood
>>> L brackets (6-8?)
>>> Door hinges (2-3, pref black)
>>> 1 2x4
>>> Hooks or latches of some kind to attach lifted countertop to bottom
>>> Epoxy for counter
>>> Primer
>>> Flat black paint
>>> Mini fridge
>>>
>>> -K
>>>
>>>
>>>
>>>
>>>
>>> On Fri, Sep 3, 2010 at 13:45, Rubin Abdi <rubin at starset.net> wrote:
>>> >
>>> > I'm back from the thing ...
>>>
>>>
>>> _______________________________________________
>>> Darkroom mailing list
>>> Darkroom at lists.noisebridge.net
>>> https://www.noisebridge.net/mailman/listinfo/darkroom
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.noisebridge.net/pipermail/darkroom/attachments/20100904/fc58795f/attachment.htm 


More information about the Darkroom mailing list