[Darkroom] Introduction

Sean Cusack sean.p.cusack at gmail.com
Wed Jun 8 23:00:40 PDT 2011

Cool! Can't wait to see the prints...and do you have a place that you were
planning on sending it to? There's a place in colorado that I've
historically sent my stuff to, but they only run double 8 once very month or
so, so turn around is sloooooow. Would love to know if you've got a fix on a
cooler spot!


On Wed, Jun 8, 2011 at 4:09 PM, Stuart O. Anderson <stuart at whispersys.com>wrote:

>  Hey Sean -
> Well, I don't plan to process it myself, but yes, it's 16mm Cine-X bw
> reversal that gets exposed twice, then cut in half after it's developed.
> You actually flip the magazine after it runs through once and then run it
> through again to expose the second side (thus 'double run').
> I'll give loading the magazines a shot in the noisebridge darkroom soon.
> Stuart
> On 06/08/2011 07:24 AM, Sean Cusack wrote:
> Mr. Stuart!
>  Am I correct in assuming that by double run you mean its a double 8mm
> camera? i.e. you bought 16mm film and are planning on cutting it in half?
>  I have a mansfield holiday II double 8 at home...it doesn't use
> cartridges, its a straight up spool. I do a pretty good job
> unloading/reloading the film in my bathroom and not getting many light
> problems on Cine-X, so I would think the NB darkroom would be OK for what
> you're looking for...those old cameras (ok, maybe I should say my old
> camera) has some leaks in it anyways that makes the resulting images look
> pretty rad IMHO.
>  Sean
> On Sun, Jun 5, 2011 at 1:05 PM, Stuart O Anderson <stuart at whispersys.com>wrote:
>> Hello Darkroom Users -
>> I recently rebuilt and repaired an all-mechanical 1948 Revere B-63
>> double run 8-mm camera.  Found some of the old magazines those cameras
>> used, and got 100' of Cine-X to load them with.  Now, I need a
>> darkroom to actually load the film into the magazines so I can start
>> shooting.  I'll probably build a small jig to make winding the cores
>> easier.
>> I see on the wiki that there are some light-leaks at the moment.  Are
>> these bad enough to fog film during loading, such that I should work
>> inside a bag?
>> Stuart
>> _______________________________________________
>> Darkroom mailing list
>> Darkroom at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/darkroom
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.noisebridge.net/pipermail/darkroom/attachments/20110608/23471926/attachment.htm 

More information about the Darkroom mailing list