[Fab] Laser cutter
coreyfro at coreyfro.com
Fri May 6 14:49:18 PDT 2011
60 passes at 1.5ma, not through. Trying 30 passes at 3ma right now.
Part of the problem, as I have experienced it, is the wood gets cooked,
burnt, and won't cut readily anymore. If anyone has other ideas, let me
On Fri, May 6, 2011 at 9:05 AM, Corey McGuire <coreyfro at coreyfro.com> wrote:
> I should say that cutting through the glue layers was messy, but trying 50
> passes instead of just 10 might be the solution.
> On Fri, May 6, 2011 at 9:01 AM, Corey McGuire <coreyfro at coreyfro.com>wrote:
>> I have had little success with plywood, but I have some ideas on what to
>> do next. I have some 3/16th's luan that I've tried before. I'm going to
>> make something a little less complex and try a new tact, soon.
>> On Fri, May 6, 2011 at 8:54 AM, Dave Johnson <dave at chenerystreet.com>wrote:
>>> Hello Fabbers,
>>> New guy here: I understand from a coworker that y'all have a largely
>>> functional laser cutter...can it cut 1/4" plywood? 1/8"?
>>> If so, I'd love to come by, throw some dollars in the jar, and play with
>>> it a little. I'd probably want someone who knows their way around it to give
>>> me an introduction, maybe I can arrange to meet somebody?
>>> I just finished my latest machine (see
>>> http://www.youtube.com/watch?v=W7REmfZ6O5U) and after cutting all those
>>> gears on a scroll saw I'm ready for a computer assist :-)
>>> Fab mailing list
>>> Fab at lists.noisebridge.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Fab