[Fab] Fwd: [Darkroom] any 110 film enthusiasts?
echohtp at gmail.com
Tue Oct 25 17:17:06 PDT 2011
couldnt I just (black) tape the insides? Possibly spraypaint it all black
and then tape the ouside?
Thanks for your reply.
On Tue, Oct 25, 2011 at 8:15 PM, Snail <snailtsunami at gmail.com> wrote:
> If you want to try for something that's light-tight, you would have to go
> for a solid build (a configuration you set when creating the gcode in
> replicatorG) and make the case design thick.
> I'm not positive it would be 100% light-tight, but that way you would not
> have the honeycomb internal pattern & case design thinness that would lead
> to cracks.
> On Tue, Oct 25, 2011 at 5:09 PM, Jason Schorr <echohtp at gmail.com> wrote:
>> Attempted to get some help working on a project and as you can see from
>> the below email it was suggested i speak with you guys.
>> I appreciate any help you might be able to provide.
>> ---------- Forwarded message ----------
>> From: Rubin Abdi <rubin at starset.net>
>> Date: Tue, Oct 25, 2011 at 8:01 PM
>> Subject: Re: [Darkroom] any 110 film enthusiasts?
>> To: Jason Schorr <echohtp at gmail.com>
>> Cc: darkroom at lists.noisebridge.net
>> Jason Schorr wrote, On 2011-10-25 16:45:
>> > Not sure what more details are needed, 110 film existed in a
>> > special cartridge. The film has been discontinued however the only
>> > is the casing and the size of the film. I have a few rolls of film, and
>> > caliper and want to cad it makerbot it and make it reloadable so that
>> > not a one shot deal.
>> Oh, for some reason I thought I read 120. Silly me.
>> So Makerbots suck at printing things that are light tight, though I'm
>> sure you know this. You might want to poke the fabrication list too.
>> rubin at starset.net
>> Fab mailing list
>> Fab at lists.noisebridge.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Fab