[Fab] Fwd: [Darkroom] any 110 film enthusiasts?
snailtsunami at gmail.com
Tue Oct 25 17:19:19 PDT 2011
Taping the inside would also work. :)
I think spraypaint wouldn't matter ... just don't use the translucent kind
of plastic. We do have plenty of black plastic, I think.
On Tue, Oct 25, 2011 at 5:17 PM, Jason Schorr <echohtp at gmail.com> wrote:
> couldnt I just (black) tape the insides? Possibly spraypaint it all black
> and then tape the ouside?
> Thanks for your reply.
> On Tue, Oct 25, 2011 at 8:15 PM, Snail <snailtsunami at gmail.com> wrote:
>> If you want to try for something that's light-tight, you would have to go
>> for a solid build (a configuration you set when creating the gcode in
>> replicatorG) and make the case design thick.
>> I'm not positive it would be 100% light-tight, but that way you would not
>> have the honeycomb internal pattern & case design thinness that would lead
>> to cracks.
>> On Tue, Oct 25, 2011 at 5:09 PM, Jason Schorr <echohtp at gmail.com> wrote:
>>> Attempted to get some help working on a project and as you can see from
>>> the below email it was suggested i speak with you guys.
>>> I appreciate any help you might be able to provide.
>>> ---------- Forwarded message ----------
>>> From: Rubin Abdi <rubin at starset.net>
>>> Date: Tue, Oct 25, 2011 at 8:01 PM
>>> Subject: Re: [Darkroom] any 110 film enthusiasts?
>>> To: Jason Schorr <echohtp at gmail.com>
>>> Cc: darkroom at lists.noisebridge.net
>>> Jason Schorr wrote, On 2011-10-25 16:45:
>>> > Not sure what more details are needed, 110 film existed in a
>>> > special cartridge. The film has been discontinued however the only
>>> > is the casing and the size of the film. I have a few rolls of film,
>>> and a
>>> > caliper and want to cad it makerbot it and make it reloadable so that
>>> > not a one shot deal.
>>> Oh, for some reason I thought I read 120. Silly me.
>>> So Makerbots suck at printing things that are light tight, though I'm
>>> sure you know this. You might want to poke the fabrication list too.
>>> rubin at starset.net
>>> Fab mailing list
>>> Fab at lists.noisebridge.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Fab