[Fab] Makerbot help?

Casey Callendrello c1 at caseyc.net
Thu Apr 12 23:38:50 PDT 2012


Hi there,
ReplicatorG 0034 is generating GCode that the Cupcakes seriously don't 
like. However, I can't seem to figure out what the problem is.

I successfully printed from one of the pre-built s3g's on the card, so I 
know the printer is at least right in its head. However, when I try to 
print g-code I've generated myself, it successfully does the 
initialization step (move up, test extrude, move down). Then, it moves 
to the right X-Y coordinate and hangs with an irritating whining sound 
and dies.

The non-comment g-code (including the last few lines of initialization) are:

M01 (The heated build platform is heating up. Wait until after the 
lights have turned off for the first time, clear the test extrusion, and 
click yes.)
G0 Z0    (Go back to zero.)
M105
;M113 S1.0
;M108 R24.0
G1 X-20.23 Y-3.63 Z0.47 F3300.0
G1 F798.0
G1 E0.3
G1 F3300.0
M101
G1 X-20.23 Y5.41 Z0.47 F371.901 E1.984
G1 X-17.34 Y8.95 Z0.47 F371.901 E2.836

(and we're off to the races)...


It seems to hang when it reaches the (-20, -3, 0.47) point. Thoughts?

Thanks!
--Casey



More information about the Fab mailing list