[Fab] Laser Cutter INOP?
m00n.b3yb at gmail.com
Sun Dec 23 23:54:25 UTC 2012
The lids closed, and there appears to be a magnet directly connect to and
defeating the lid/safety lock out anyways. The key is also switched to on.
On Sun, Dec 23, 2012 at 3:35 PM, Alan Rockefeller <alanrockefeller at gmail.com
> As Rubin said I'd suspect the big red button first. Also if the lid
> isn't closed (there is a magnetic switch to detect this) you'll get the
> same symptoms.
> On Sun, Dec 23, 2012 at 3:20 PM, Moon Baby <m00n.b3yb at gmail.com> wrote:
>> There seems to be an issue with laser cutter, the computer interface and
>> control are working, it starts up and makes noise, the positioning laser
>> works, however when trying to actually cut/etch nothing shows up on the
>> output meter and the laser itself doesn't seem to be on or firing. Nothing
>> happens with the test laser button either.
>> Fab mailing list
>> Fab at lists.noisebridge.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Fab