[Fab] Drill press fixed
coreyfro at coreyfro.com
Wed Jul 25 16:01:18 PDT 2012
Also, use oil, take your time, set the speed (rpm vs torque) accordingly,
on any large cuts.
On Wed, Jul 25, 2012 at 10:22 AM, Casey Callendrello <c1 at caseyc.net> wrote:
> Awesome. Thanks!
> I imagine some of our duller drill bits are also pushing the torque
> limit. Does anyone know how to sharpen drill bits using a bench grinder?
> If so, can you teach me?
> On 7/25/12 10:14 AM, Andy Isaacson wrote:
> > John and I installed the new chuck on the drill press last night.
> > We believe the previous chuck was damaged due to using too-large hole
> > saw bits. This style of chuck is attached to the drill via a "taper",
> > which can be loosened and damaged if given too much torque.
> > So, please don't use drill bits larger than 1" diameter on the Ryobi
> > drill press at Noisebridge. I'll try to put up a sign explaining this,
> > but if anybody beats me to it that would be great.
> > The new chuck is Authentic German Engineering, including Auf<->Zu
> > markings. It's pretty awesome. The only downside is that it requires
> > two hands to tighten. C'est la vie.
> > -andy
> > _______________________________________________
> > Fab mailing list
> > Fab at lists.noisebridge.net
> > https://www.noisebridge.net/mailman/listinfo/fab
> Fab mailing list
> Fab at lists.noisebridge.net
Everything should be made as simple as possible, but no simpler - Albert
Simplicity is the ultimate sophistication - Leonardo Da
Perfection is reached not when there is nothing left to add, but when there
is nothing left to take away - Antoine de Saint
Keep It Simple Stupid - Kelly
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Fab