[Fab] Laser cuting not cutting & no lights? Broken?

jarrod hicks hicksu at gmail.com
Sat Mar 30 21:10:38 UTC 2013


Laser cutter is back online. I speculate that the exhast for the air
compressor was either blocked or the compressor itself was overheating.




On Sat, Mar 30, 2013 at 11:48 AM, Ken M. Haggerty <kenmhaggerty at gmail.com>wrote:

> Hello! Was hoping to do a lasercutting demo at today's fundraiser but the
> cutter is not cutting. Something must be unplugged/unwired, as it does not
> cut/etch and the lights that usually illuminate the basin are not on. The
> head still moves and the setup communicates correctly with the computer.
>
> Thanks,
> Ken
>
> _______________________________________________
> Fab mailing list
> Fab at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/fab
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/fab/attachments/20130330/1231cee1/attachment.html>


More information about the Fab mailing list