[EEG] Fwd: electrodes

Josh Bailey josh at anarkiwi.com
Tue Dec 22 19:54:13 PST 2009


The key question is how many pins these DLR connectors have. I don't 
recall and if it's mentioned in the thread I missed it.

Re cables. While looking for some replacement parts for my rail gun 
trigger system I came across the attached. They're just analog connectors 
off of old CD/DVD drives. Nice cable too. Just the thing for OpenEEG 
hardware. I need to scrounge some more floppy cable to hook up another 
analog board to "my" system.

Tired,

On Tue, 22 Dec 2009, Kelly wrote:

> >Seems like a waste of plugs. Hard pressed to imagine why you want more
> than 1 plug/channel?
> 
> One for each electrode I guess?  Those plugs only support one?  Or can we
> pipe a few through each?
> 
> I think that what we're going to do here is wire for the highest common
> denominator.  The passive electrode setup could be simpler, but I think we
> should be able to run it with the more complex board too, right?
> 
> I'm cc-ing John, who I don't think is on the mailing list yet.  Peer
> pressure guys, come on...
> 
> -K
> 
> On Mon, Dec 21, 2009 at 10:45 PM, Josh Bailey <josh at anarkiwi.com> wrote:
> 
> >
> > OK. That makes more sense. :)
> >
> > Seems like a waste of plugs. Hard pressed to imagine why you want more
> > than 1 plug/channel?
> >
> > I should take a look at the thing next time. Sorry I was too busy
> > congratulating myself over my hardware working and not helping. :( :/
> >
> > On Mon, 21 Dec 2009, Tracy Jacobs wrote:
> >
> > > Sorry, I said Pedro's is 4 channels but it's only 2 channels!  Four
> > > electrodes, two channels, nine XRL plugs including the DRL.
> > >
> > > Begin forwarded message:
> > >
> > > > From: Tracy Jacobs <kinetical at comcast.net>
> > > > Date: December 21, 2009 10:06:56 PM PST
> > > > To: eeg at lists.noisebridge.net
> > > > Subject: Re: [EEG] electrodes
> > > >
> > > > Well, when you look at Pedro's whole setup for 4 channels, he is using
> > > > 8 xlr plugs plus one drl.
> > > >
> > > > The way Mitch wired up these two electrodes I have makes it seem like
> > > > I can't wire them up to one xlr plug, but would need 2 for each
> > > > electrode, because each electrode has 2 cables with wires going to
> > > > different things.
> > > >
> > > > The passive elctrode diagram is much simpler, it looks like 2
> > > > electrodes/one channel going to  one xlr plug with one cable per
> > > > electrode?
> > > >
> > > > The wiring looks really  different to me...
> > > >
> > > > Tracy
> > > > On Dec 21, 2009, at 9:55 PM, Josh Bailey wrote:
> > > >
> > > > >
> > > > > Bit confused. The major difference between active/passive wiring is
> > > > > with
> > > > > active you of course have to ship the power up to the 'trode. I
> > > > > don't see
> > > > > any other major difference (i.e. I don't expect to see one)? What am
> > I
> > > > > missing?
> > > > >
> > > > > On Mon, 21 Dec 2009, Tracy Jacobs wrote:
> > > > >
> > > > > > Hello group,
> > > > > >
> > > > > > I was studying the instructions on the open EEG site for the case
> > and
> > > > > > cabling again, and it looks like you hook up the cables a bit
> > > > > > differently for the active elctrodes that I made :
> > > > > >
> > > > > > http://www.dcc.uchile.cl/~peortega/ae/<http://www.dcc.uchile.cl/%7Epeortega/ae/>
> > > > > >
> > > > > >
> > > > > >
> > > > > > than you might want to do for the cap or for passive electrodes.
> > > > > >
> > > > > > http://openeeg.sourceforge.net/doc/SimpleEEG/CaseCabling.html
> > > > > >
> > > > > > So, I'm not a little unsure  how to proceed with the wiring.
> > > > > >
> > > > > > I made 4 of the PEdro's active electrodes, boards and all, and it
> > > > > > would be lovely to get them to work. But that's still only two
> > > > > > channels,
> > > > > >
> > > > > > Mitch said to use his boards with mine for the 4 channel.  There is
> > > > > > enough room for 8 channels in this box, at least, if we can find
> > the
> > > > > > boards.
> > > > > >
> > > > > >
> > > > > > Tracy
> > > > > > _______________________________________________
> > > > > > EEG mailing list
> > > > > > EEG at lists.noisebridge.net
> > > > > > https://www.noisebridge.net/mailman/listinfo/eeg
> > > > > >
> > > > > >
> > > > >
> > > > > --
> > > > > Josh Bailey (josh at anarkiwi.com)
> > > >
> > > > _______________________________________________
> > > > EEG mailing list
> > > > EEG at lists.noisebridge.net
> > > > https://www.noisebridge.net/mailman/listinfo/eeg
> > >
> >
> > --
> > Josh Bailey (josh at anarkiwi.com)
> > _______________________________________________
> > EEG mailing list
> > EEG at lists.noisebridge.net
> > https://www.noisebridge.net/mailman/listinfo/eeg
> >
> 

-- 
Josh Bailey (josh at anarkiwi.com)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: someaudioconnectors.jpg
Type: image/jpeg
Size: 232314 bytes
Desc: 
Url : http://www.noisebridge.net/pipermail/neuro/attachments/20091223/6ad44a98/attachment-0002.jpg 


More information about the EEG mailing list