[Noisebridge-discuss] soda machine
girlgeek at wt.net
Wed Jan 26 21:16:43 PST 2011
Since this machine is still under warranty. And since there is a whole
country of soda machines with buttons set correctly, possibly the seller
of the machine could tell us how it is done.
On 1/26/2011 5:36 PM, Jared Dunne wrote:
> FYI, I've since closed back up the machine.
> As jof points out it takes an insane amount of counterclockwise
> unscrewing to get it to open. Even once it's unscrewed, it takes a big
> tug to get it open. (make sure to close it back up very tight when
> done to keep the coldness in)
> Some us explored how to install labels in the button once but gave up
> once we saw how many wires and bits are blocking the way to the
> buttons. We were concerned about breaking the buttons. It's
> definitely worth more more tinkering for a patient and curious soul.
> Let us know if you figure out an easy way to slip in new labels. Even
> better please update the wiki page:
> On Wed, Jan 26, 2011 at 4:17 PM, Jonathan Lassoff<jof at thejof.com> wrote:
>> On Wed, Jan 26, 2011 at 4:03 PM, girlgeek<girlgeek at wt.net> wrote:
>>> The reason that I have not changed the buttons on the coke machine as
>>> was suggested in do-ocracy manner is...
>>> Once I unlocked the machine I could not get it open.
>>> Once I gave up on getting it open, I could not get it relocked.
>> The lock requires unscrewing it a LOT of times. It takes a minute or
>> two to get it all the way out and in. Maybe try to keep turning?
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1202 / Virus Database: 1435/3405 - Release Date: 01/26/11
More information about the Noisebridge-discuss