[Noisebridge-discuss] Great Seal of Noisebridge - 25.5" diameter mild steel Noisebridge logo

Patrick Keys citizenkeys at gmail.com
Fri Jan 28 13:45:15 PST 2011


red cathode backlighting seems proper because the seal is basically black and black/red are noisebridge colors.

best location for the seal, imho, is centered above the bike racks. because there's not really anything visually interesting along that wall right now and also because its a giant metal noisebridge logo and deserves a prominent location.


Patrick


"Jack Perkins" <jackaperkins at gmail.com> wrote:

>Personally I think it's rad as a giant unpolished metal seal, but
>please don't let that stop you from making it something more!
>
>On Fri, Jan 28, 2011 at 9:44 AM, Corey McGuire <coreyfro at coreyfro.com>
>wrote:
>> So here's what I could do. I can grind the back surface down to raw
>> metal and spray the back with reflective rustolum brand spray paint.
>>
>> We can then take a 2" srtip of material, plastic probably, and run it
>> around the circumstance of the piece. That will give it the depth for
>> LED magic.
>>
>> Another effect would be red cold cathode. Might be cheaper and
>easier.
>>
>> On Friday, January 28, 2011, Albert Sweigart <asweigart at gmail.com>
>wrote:
>>> It'd be nice if we could hang it where it is now, but with some
>space
>>> behind it for some red (or color changing) LEDs. Any volunteers?
>>>
>>> -Al
>>>
>>> On Fri, Jan 28, 2011 at 8:56 AM, Glen Jarvis <glen at glenjarvis.com>
>wrote:
>>>> I found it most impressive when I saw it as I walked up the steps
>to NB. It seems to be in a place where everyone who visits will see it,
>regardless what part of NB they are visiting.
>>>>
>>>> I was very impressed with it :). Excellent job, Corey :)
>>>>
>>>> Glen
>>>>
>>>> El Jan 27, 2011, a las 10:06 PM, Patrick Keys
><citizenkeys at gmail.com> escribió:
>>>>
>>>>> Corey McGuire made this last weekend using a Thermadyne Cutmaster
>A-120 plasma cutter.  It's here at Noisebridge. He suggested somebody
>go ahead and take a picture of it.
>>>>>
>>>>> Here's its location on the wiki:
>>>>> https://www.noisebridge.net/wiki/Great_Seal_of_Noisebridge
>>>>>
>>>>> I attempted to upload the stencil file to the wiki and link to it.
>However, the wiki will not accept .SVG files as a valid file type.
>>>>>
>>>>> This steel Noisebridge logo deserves to be displayed prominently
>inside of Noisebridge.  Anybody have any ideas where we should place
>it?
>>>>>
>>>>>
>>>>> Patrick
>>>>> <Great_Seal_of_Noisebridge.jpg>
>>>>> _______________________________________________
>>>>> Noisebridge-discuss mailing list
>>>>> Noisebridge-discuss at lists.noisebridge.net
>>>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>> _______________________________________________
>>>> Noisebridge-discuss mailing list
>>>> Noisebridge-discuss at lists.noisebridge.net
>>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>>
>>> _______________________________________________
>>> Noisebridge-discuss mailing list
>>> Noisebridge-discuss at lists.noisebridge.net
>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
>_______________________________________________
>Noisebridge-discuss mailing list
>Noisebridge-discuss at lists.noisebridge.net
>https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss



More information about the Noisebridge-discuss mailing list