[Noisebridge-discuss] payphone at gate
jake at spaz.org
Wed Apr 11 14:52:41 PDT 2012
i think we should also fix the folks who cut all our cables
with wire strippers and a hot soldering iron.
On Wed, 11 Apr 2012, Kelly wrote:
> I will check out the cut cables next time I can come there. Should be
> fixable. Anyone else who wants to work on this can ping me offlist.
> On Wed, Apr 11, 2012 at 06:36, Jake <jake at spaz.org> wrote:
>> you may have noticed a payphone bolted to the gate. it is a numeric
>> keypad connected to minotaur through a long blue serial cable.
>> it is for access control or whatever the software does with it.
>> if you need to open it, for example to access the mounting hardware,
>> please contact superq ben somehow for the key.
>> his email is superq at gmail dot com
>> i will be out of the california until 4/28
>> the blue cable which connects the payphone was cut along with a bunch of
>> other wires by oogles upset at being kicked out of the space.
>> unfortunately there is no video of them.
>> when repairing this section of blue cat5, be careful because there is 12v
>> in a couple of the wires, and if you short them the power supply on
>> minotaur will probably shut down. you can disconnect the cat5 from the
>> 12v by unplugging it where it connects to minotaur, it's a RJ45 connector
>> being adapted to DB9 serial with yellow and black wires going in for the
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
More information about the Noisebridge-discuss