[Noisebridge-discuss] payphone at gate

Nicholas Granado ngranado at gmail.com
Wed Apr 11 17:03:02 PDT 2012


that's a lot of time and effort to run conduit like that, i think we could
achieve the same effect by moving the cables higher on the wall.  Asheem
and I ran that blue cable down to the gate a couple of months ago (there
should be sufficient slack in the cable to move it up), and it was a real
pain to get the cable all run.

i would suggest that anyone attempting to repair the cable to unplug the
minotaur side before soldering anything, that way there's no crossing of
any cables. i also have a butane powered soldering iron if that would help,
although i think rj45 connectors + crimps + a RJ45 cable joiner should do
the trick and would be far more safe.

nick



On Wed, Apr 11, 2012 at 3:49 PM, Ben Kochie <superq at gmail.com> wrote:

> Yea, I have a bunch of EMT and flex conduit.  I might go measure
> things up at the gate and get some ridged (thick walled) conduit
> pieces.
>
> On Wed, Apr 11, 2012 at 15:07, Martin Bogomolni <martinbogo at gmail.com>
> wrote:
> > Depending on how things are wired, we could add some relatively
> > inexpensive metal conduit pipe from the door to wherever the wire
> > enters the wall to go upstairs.
> >
> > Barring a hacksaw, it would make it much harder to cut the wires inside.
> >
> > -M
> > _______________________________________________
> > Noisebridge-discuss mailing list
> > Noisebridge-discuss at lists.noisebridge.net
> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.noisebridge.net/pipermail/noisebridge-discuss/attachments/20120411/77926b24/attachment.htm 


More information about the Noisebridge-discuss mailing list