[Noisebridge-discuss] Front door buzzer/lock
martinbogo at gmail.com
Tue Apr 17 12:42:31 PDT 2012
Thanks .. Yep, he's got the strike. They are made by Lee Electric,
and I'll go pick it up on Friday. The only 'issue' is that the Lee
Electric strikes are not designed to "buzz" with the AC, so we may
need to wire in an indicator to show the gate is unlocked.
Hopefully, it will fit the mortise that the old one was in.
On Tue, Apr 17, 2012 at 12:27 PM, lilia <liliakai at gmail.com> wrote:
> Pictures sent! I do not include them here because I assume discuss
> would bounce or hold any message with attachments.
> On Tue, Apr 17, 2012 at 11:51 AM, Martin Bogomolni <martinbogo at gmail.com> wrote:
>> I still need a picture of the actual device. They come in left and
>> right hand side, and the size of the strike is equally important.
>> It's also good to know it's an AC and not a DC strike. That means I
>> can ignore whole cases of parts that he has...
>> On Tue, Apr 17, 2012 at 10:01 AM, Danny O'Brien <danny at spesh.com> wrote:
>>> On Tue, Apr 17, 2012 at 4:37 AM, Martin Bogomolni <martinbogo at gmail.com>
>>>> If someone has a moment, could you take a picture of the front door
>>>> buzzer mechanism? I'll be passing by a locksmith's house later
>>>> today, and can root through his collection of used/refurbished locks.
>>>> Also, I need to know if it is 12V, 24V, or 120VAC.
>>> Lilia says: The coil is marked 8V-16V and we
>>> observed 14V AC on the multimeter. That should be adequate to get the
>>> right part.
>>>> Noisebridge-discuss mailing list
>>>> Noisebridge-discuss at lists.noisebridge.net
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
More information about the Noisebridge-discuss