[Noisebridge-discuss] Noisebridge-discuss Digest, Vol 53, Issue 17

ITechGeek itg at itechgeek.com
Mon Mar 19 17:40:31 PDT 2012


I would agree a general hackerspace discussion list is not the place for racist/sexist or any other type of derogatory jokes.  That being said this is the Internet and we are geeks, so how about making a place?

Anyone know if that violates Google Groups TOS?

Sent from my iPad

On Mar 19, 2012, at 19:03, Matt Joyce <matt at nycresistor.com> wrote:

> Where is the list for racist jokes?
> 
> I love racist jokes.  Did anyone see the Paddy's day 30 rock?  That
> shit was hilarious.
> 
> 2012/3/19 daravinne <daravinne at gmail.com>:
>> http://mistwoodlabs.redisis.net  HMMMM
>> 
>> 
>> 
>> 2012/3/19 Rachel McConnell <rachel at xtreme.com>
>>> 
>>> The purpose of the list is absolutely NOT for sending racist jokes. Please
>>> don't use it for that any more.
>>> 
>>> -Rachel
>>> 
>>> On Mar 18, 2012, at 13:01, Mistwood Laboratories <mistwoodlabs at gmail.com>
>>> wrote:
>>> 
>>> so im guessing this mailing list dosent have any functionality??? it just
>>> sends out what was or mabey what may be talked about today???? what is the
>>> purpose of the mailing list so im not confused.
>>> 
>>> Also a great joke.
>>> What is the definition of Confused???
>>> Father's Day in Harlem
>>> OR
>>> Oakland
>>> 
>>> On Sat, Mar 17, 2012 at 12:00 PM,
>>> <noisebridge-discuss-request at lists.noisebridge.net> wrote:
>>>> 
>>>> Send Noisebridge-discuss mailing list submissions to
>>>>       noisebridge-discuss at lists.noisebridge.net
>>>> 
>>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>>       https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>> or, via email, send a message with subject or body 'help' to
>>>>       noisebridge-discuss-request at lists.noisebridge.net
>>>> 
>>>> You can reach the person managing the list at
>>>>       noisebridge-discuss-owner at lists.noisebridge.net
>>>> 
>>>> When replying, please edit your Subject line so it is more specific
>>>> than "Re: Contents of Noisebridge-discuss digest..."
>>>> 
>>>> Today's Topics:
>>>> 
>>>>  1. SF Analog Circuits group! (Michael Prados)
>>>>  2. Re: Laser engraver needs to go back in the DJ     booth
>>>>     (Corey McGuire)
>>>>  3. Re: Laser engraver needs to go back in the DJ     booth
>>>>     (William Sargent)
>>>>  4. Anyone going to Creators Project tomorrow? (daravinne)
>>>>  5. Re: Looking for a very small DC generator (Jake)
>>>>  6. know anyone in Frankfurt / CCC? (Kelly)
>>>>  7. Private Manning vs. Staff Sgt. Robert Bales (Jake)
>>>>  8. Re: Private Manning vs. Staff Sgt. Robert Bales
>>>>     (Tony Longshanks LeTigre)
>>>>  9. Re: Private Manning vs. Staff Sgt. Robert Bales
>>>>     (Gopiballava Flaherty)
>>>> 10. Re: Android Phone with only 220mb internal        memory (Kirk Lau)
>>>> 11. WeKnow - Noisebridge's collective knowledge       in wiki form
>>>> (Jake)
>>>> 12. weknow knowledge base (Jake)
>>>> 
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: Michael Prados <mprados at gmail.com>
>>>> To: NoiseBridge Discuss <noisebridge-discuss at lists.noisebridge.net>
>>>> Cc:
>>>> Date: Fri, 16 Mar 2012 12:07:35 -0700
>>>> Subject: [Noisebridge-discuss] SF Analog Circuits group!
>>>> Hi All,
>>>> 
>>>> Some of you may be familiar with SF Microcontrollers, an informal group
>>>> that meets occasionally to discuss microcontroller projects, which also has
>>>> a useful email list:
>>>> 
>>>> http://tech.groups.yahoo.com/group/SFmicrocontrollers/
>>>> 
>>>> Lately, after noticing a lot of traffic related to circuit design,
>>>> especially analog circuits, this group has budded a new offshoot devoted to
>>>> this topic:
>>>> 
>>>> http://groups.google.com/group/sfanalogcircuits
>>>> 
>>>> If you are interested in analog circuits, and have interesting problems
>>>> or interesting solutions, please sign up!  Personally, I see this as a
>>>> potentially very useful online resource, and a good way to organize
>>>> occasional meetings as well.  Among other things, we could talk about noise
>>>> bridges!
>>>> 
>>>> We now return you to your regularly scheduled distractions,
>>>> -Mike
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: Corey McGuire <coreyfro at coreyfro.com>
>>>> To: Jeff Tchang <jeff.tchang at gmail.com>
>>>> Cc: NoiseBridge Discuss <Noisebridge-discuss at lists.noisebridge.net>
>>>> Date: Fri, 16 Mar 2012 14:05:53 -0700
>>>> Subject: Re: [Noisebridge-discuss] Laser engraver needs to go back in the
>>>> DJ booth
>>>> People are engraving and cutting particle board and plywood, which smokes
>>>> a ton, fills up the room, and is full of vaporized formaldehyde...
>>>> 
>>>> ...so...yeah...fun shit
>>>> 
>>>> On Fri, Mar 16, 2012 at 10:13 AM, Jeff Tchang <jeff.tchang at gmail.com>
>>>> wrote:
>>>>> 
>>>>> Did someone try to engrave ABS?
>>>>> 
>>>>> On Fri, Mar 16, 2012 at 7:54 AM, Gian Pablo Villamil
>>>>> <gian.pablo at gmail.com> wrote:
>>>>>> +1
>>>>>> 
>>>>>> I remember a lot of effort went into prepping that room for the laser.
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> On Mar 14, 2012, at 9:32 PM, Corey McGuire <coreyfro at coreyfro.com>
>>>>>> wrote:
>>>>>> 
>>>>>> No, we should not put the Electron microscope in the DJ booth.  We
>>>>>> should
>>>>>> not prioritize some prime real-estate for something few, if anyone,
>>>>>> will
>>>>>> use.
>>>>>> 
>>>>>> We NEED to put the laser engraver BACK in the DJ booth because we need
>>>>>> to
>>>>>> put it in a room where the pollutants that escape it can easily be
>>>>>> evacuated
>>>>>> outside, easily, with a huge array of fans.
>>>>>> 
>>>>>> WHY?!?!?!?!?
>>>>>> 
>>>>>> Because people will laser engrave shit in it that is POISONOUS!  We
>>>>>> need to
>>>>>> put the laser engraver someplace where we can control it's fumes.
>>>>>> 
>>>>>> Not only that, we need to keep the ducting as short as possible to
>>>>>> evacuate
>>>>>> smoke more quickly to improve cutting.  Smoke in the chamber means
>>>>>> smoke in
>>>>>> the beam.  Smoke in the beam means diffused energy.  Diffused energy
>>>>>> means
>>>>>> weak cutting.  This will also mean the optics will foul more quickly.
>>>>>> 
>>>>>> I have told this to a bunch of people individually, but they are still
>>>>>> ignoring it.  So now I am making a stink...
>>>>>> 
>>>>>> ...before idiots start stinking up Noisebridge with cyanide from laser
>>>>>> engraving ABS
>>>>>> 
>>>>>> Please, don't be idiots.  Put...the laser...back.
>>>>>> 
>>>>>> _______________________________________________
>>>>>> Noisebridge-discuss mailing list
>>>>>> Noisebridge-discuss at lists.noisebridge.net
>>>>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>>>> 
>>>>>> 
>>>>>> _______________________________________________
>>>>>> Noisebridge-discuss mailing list
>>>>>> Noisebridge-discuss at lists.noisebridge.net
>>>>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> --
>>>> Everything should be made as simple as possible, but no simpler - Albert
>>>> Einstein
>>>> Simplicity is the ultimate sophistication - Leonardo Da Vinci
>>>> Perfection is reached not when there is nothing left to add, but when
>>>> there is nothing left to take away - Antoine de Saint Exupéry
>>>> Keep It Simple Stupid - Kelly Johnson
>>>> 
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: William Sargent <will.sargent at gmail.com>
>>>> To: Corey McGuire <coreyfro at coreyfro.com>
>>>> Cc: Jeff Tchang <jeff.tchang at gmail.com>, NoiseBridge Discuss
>>>> <Noisebridge-discuss at lists.noisebridge.net>
>>>> Date: Fri, 16 Mar 2012 14:14:16 -0700
>>>> Subject: Re: [Noisebridge-discuss] Laser engraver needs to go back in the
>>>> DJ booth
>>>> a) It smells TERRIBLE.
>>>> b) It makes me think I'm getting cancer just by breathing it.
>>>> 
>>>> Please move it some place it's not killing us, kthxbye.
>>>> 
>>>> Will.
>>>> 
>>>> On Mar 16, 2012, at 2:05 PM, Corey McGuire wrote:
>>>> 
>>>> People are engraving and cutting particle board and plywood, which smokes
>>>> a ton, fills up the room, and is full of vaporized formaldehyde...
>>>> 
>>>> ...so...yeah...fun shit
>>>> 
>>>> On Fri, Mar 16, 2012 at 10:13 AM, Jeff Tchang <jeff.tchang at gmail.com>
>>>> wrote:
>>>>> 
>>>>> Did someone try to engrave ABS?
>>>>> 
>>>>> On Fri, Mar 16, 2012 at 7:54 AM, Gian Pablo Villamil
>>>>> <gian.pablo at gmail.com> wrote:
>>>>>> +1
>>>>>> 
>>>>>> I remember a lot of effort went into prepping that room for the laser.
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> On Mar 14, 2012, at 9:32 PM, Corey McGuire <coreyfro at coreyfro.com>
>>>>>> wrote:
>>>>>> 
>>>>>> No, we should not put the Electron microscope in the DJ booth.  We
>>>>>> should
>>>>>> not prioritize some prime real-estate for something few, if anyone,
>>>>>> will
>>>>>> use.
>>>>>> 
>>>>>> We NEED to put the laser engraver BACK in the DJ booth because we need
>>>>>> to
>>>>>> put it in a room where the pollutants that escape it can easily be
>>>>>> evacuated
>>>>>> outside, easily, with a huge array of fans.
>>>>>> 
>>>>>> WHY?!?!?!?!?
>>>>>> 
>>>>>> Because people will laser engrave shit in it that is POISONOUS!  We
>>>>>> need to
>>>>>> put the laser engraver someplace where we can control it's fumes.
>>>>>> 
>>>>>> Not only that, we need to keep the ducting as short as possible to
>>>>>> evacuate
>>>>>> smoke more quickly to improve cutting.  Smoke in the chamber means
>>>>>> smoke in
>>>>>> the beam.  Smoke in the beam means diffused energy.  Diffused energy
>>>>>> means
>>>>>> weak cutting.  This will also mean the optics will foul more quickly.
>>>>>> 
>>>>>> I have told this to a bunch of people individually, but they are still
>>>>>> ignoring it.  So now I am making a stink...
>>>>>> 
>>>>>> ...before idiots start stinking up Noisebridge with cyanide from laser
>>>>>> engraving ABS
>>>>>> 
>>>>>> Please, don't be idiots.  Put...the laser...back.
>>>>>> 
>>>>>> _______________________________________________
>>>>>> Noisebridge-discuss mailing list
>>>>>> Noisebridge-discuss at lists.noisebridge.net
>>>>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>>>> 
>>>>>> 
>>>>>> _______________________________________________
>>>>>> Noisebridge-discuss mailing list
>>>>>> Noisebridge-discuss at lists.noisebridge.net
>>>>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> --
>>>> Everything should be made as simple as possible, but no simpler - Albert
>>>> Einstein
>>>> Simplicity is the ultimate sophistication - Leonardo Da Vinci
>>>> Perfection is reached not when there is nothing left to add, but when
>>>> there is nothing left to take away - Antoine de Saint Exupéry
>>>> Keep It Simple Stupid - Kelly Johnson
>>>> _______________________________________________
>>>> Noisebridge-discuss mailing list
>>>> Noisebridge-discuss at lists.noisebridge.net
>>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>> 
>>>> 
>>>> 
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: daravinne <daravinne at gmail.com>
>>>> To: noisebridge-discuss Discuss
>>>> <noisebridge-discuss at lists.noisebridge.net>
>>>> Cc:
>>>> Date: Fri, 16 Mar 2012 14:21:27 -0700
>>>> Subject: [Noisebridge-discuss] Anyone going to Creators Project tomorrow?
>>>> I managed to get picked for a last minute ticket for The Creators'
>>>> Project tomorrow:  http://www.eventbrite.com/event/3017205543  Is anyone
>>>> else going?  Tomorrow is the ticket-only part, Sunday is when it's open to
>>>> the general public.
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: Jake <jake at spaz.org>
>>>> To: "noisebridge-discuss at lists.noisebridge.net"
>>>> <noisebridge-discuss at lists.noisebridge.net>
>>>> Cc:
>>>> Date: Fri, 16 Mar 2012 16:48:07 -0700 (PDT)
>>>> Subject: Re: [Noisebridge-discuss] Looking for a very small DC generator
>>>> I think you're looking for vibrators from cellphones or pagers.
>>>> 
>>>> -jake
>>>> 
>>>> Sean wrote:
>>>> 
>>>> I'm looking for a component for my project that's proving difficult to
>>>> find.  I'm hoping maybe someone could point me in the right direction.
>>>> 
>>>> I'm looking for a very small DC generator (or motor to be used as a
>>>> generator) with the following specs:
>>>> - The thinnest dimension has to be less than about 6mm (a vertical shaft
>>>> ("pancake") orientation is preferred, but I might be able to use a
>>>> horizontal shaft motor.)
>>>> - It needs to produce about 250mW at a speed of less than 500RPM
>>>> - Output voltage of 3-5V is ideal
>>>> 
>>>> Any suggestions are much appreciated!
>>>> 
>>>> - Sean
>>>> 
>>>> 
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: Kelly <hurtstotouchfire at gmail.com>
>>>> To: Noisebridge <noisebridge-discuss at lists.noisebridge.net>
>>>> Cc:
>>>> Date: Sat, 17 Mar 2012 01:35:59 +0100
>>>> Subject: [Noisebridge-discuss] know anyone in Frankfurt / CCC?
>>>> I'd like to visit the CCC here in Frankfurt, but their website is
>>>> pretty sketchy on the contact options. Anyone know somebody I could
>>>> ping? I am here for the weekend and fly back to SF on Monday. Just in
>>>> time for our beloved meeting...
>>>> 
>>>> -Kelly
>>>> 
>>>> 
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: Jake <jake at spaz.org>
>>>> To: "noisebridge-discuss at lists.noisebridge.net"
>>>> <noisebridge-discuss at lists.noisebridge.net>
>>>> Cc:
>>>> Date: Fri, 16 Mar 2012 18:14:48 -0700 (PDT)
>>>> Subject: [Noisebridge-discuss] Private Manning vs. Staff Sgt. Robert
>>>> Bales
>>>> regarding the US Army guy who killed 16 afghan civilians in the night
>>>> (most of them children)
>>>> 
>>>> from the comments:
>>>> 
>>>> It will be interesting to compare how the military treats this individual
>>>> compared to how Private Manning is being treated. It will demonstrate which
>>>> crime they think is more serious.
>>>> 
>>>> the story:
>>>> Afghan Shooting Suspect Identified as Army Staff Sgt. Robert Bales
>>>> 
>>>> http://www.nytimes.com/2012/03/17/world/asia/afghan-shooting-suspect-identified-as-army-staff-sgt-robert-bales.html
>>>> 
>>>> 
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: Tony Longshanks LeTigre <anthonyletigre at gmail.com>
>>>> To: Jake <jake at spaz.org>
>>>> Cc: Noisebridge Discuss <noisebridge-discuss at lists.noisebridge.net>
>>>> Date: Fri, 16 Mar 2012 18:20:47 -0700
>>>> Subject: Re: [Noisebridge-discuss] Private Manning vs. Staff Sgt. Robert
>>>> Bales
>>>> Place your bets now, folks....
>>>> 
>>>> On Fri, Mar 16, 2012 at 6:14 PM, Jake <jake at spaz.org> wrote:
>>>>> 
>>>>> regarding the US Army guy who killed 16 afghan civilians in the night
>>>>> (most of them children)
>>>>> 
>>>>> from the comments:
>>>>> 
>>>>> It will be interesting to compare how the military treats this
>>>>> individual
>>>>> compared to how Private Manning is being treated. It will demonstrate
>>>>> which crime they think is more serious.
>>>>> 
>>>>> the story:
>>>>> Afghan Shooting Suspect Identified as Army Staff Sgt. Robert Bales
>>>>> 
>>>>> http://www.nytimes.com/2012/03/17/world/asia/afghan-shooting-suspect-identified-as-army-staff-sgt-robert-bales.html
>>>>> _______________________________________________
>>>>> Noisebridge-discuss mailing list
>>>>> Noisebridge-discuss at lists.noisebridge.net
>>>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>> 
>>>> 
>>>> 
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: Gopiballava Flaherty <gopiballava at gmail.com>
>>>> To: Noisebridge Discuss <noisebridge-discuss at lists.noisebridge.net>
>>>> Cc:
>>>> Date: Fri, 16 Mar 2012 20:08:33 -0600
>>>> Subject: Re: [Noisebridge-discuss] Private Manning vs. Staff Sgt. Robert
>>>> Bales
>>>> A) Didn't they recently plea bargain some guys who killed people?
>>>> B) There are too many feedback loops in here. The appearance of
>>>> priorities is a feedback loop. Nobody wants to be seen to care more about
>>>> embarrassment than murder.
>>>> 
>>>> Thanks,
>>>> 
>>>> gopi at iPad
>>>> 
>>>> On Mar 16, 2012, at 19:20, Tony Longshanks LeTigre
>>>> <anthonyletigre at gmail.com> wrote:
>>>> 
>>>> Place your bets now, folks....
>>>> 
>>>> On Fri, Mar 16, 2012 at 6:14 PM, Jake <jake at spaz.org> wrote:
>>>>> 
>>>>> regarding the US Army guy who killed 16 afghan civilians in the night
>>>>> (most of them children)
>>>>> 
>>>>> from the comments:
>>>>> 
>>>>> It will be interesting to compare how the military treats this
>>>>> individual
>>>>> compared to how Private Manning is being treated. It will demonstrate
>>>>> which crime they think is more serious.
>>>>> 
>>>>> the story:
>>>>> Afghan Shooting Suspect Identified as Army Staff Sgt. Robert Bales
>>>>> 
>>>>> http://www.nytimes.com/2012/03/17/world/asia/afghan-shooting-suspect-identified-as-army-staff-sgt-robert-bales.html
>>>>> _______________________________________________
>>>>> Noisebridge-discuss mailing list
>>>>> Noisebridge-discuss at lists.noisebridge.net
>>>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Noisebridge-discuss mailing list
>>>> Noisebridge-discuss at lists.noisebridge.net
>>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>> 
>>>> 
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: Kirk Lau <kirk1978 at gmail.com>
>>>> To: xinchejian at googlegroups.com
>>>> Cc: NoiseBridge Discuss <noisebridge-discuss at lists.noisebridge.net>
>>>> Date: Fri, 16 Mar 2012 20:53:42 +0800
>>>> Subject: Re: [Noisebridge-discuss] Android Phone with only 220mb internal
>>>> memory
>>>> in your phone, go to your contact, and press the menu key,
>>>> u have option of which group of contact to sync
>>>> choose the group you want..
>>>> 
>>>> 2012/3/16 Jeff Rust <jsmtechnologies at gmail.com>:
>>>>> I have a problem with my phone saying memory full if I sync google
>>>>> contacts.
>>>>> I used to have only 4,000 contacts now that google plus has added all
>>>>> circled people to g contacts I have over 10,000 !!! WTF
>>>>> It takes over 110mb of my only 220mb of internal storage. I am trying
>>>>> to
>>>>> find a way to sync google calendar,contacts, mail to my sd instead of
>>>>> the
>>>>> phone. It would also be great if I can do that with my sms/mms messages
>>>>> as
>>>>> well.
>>>>> 
>>>>> I would love to be able to sync my new sd/sim contacts back to google
>>>>> as
>>>>> well.
>>>>> 
>>>>> Let me know what you think. My email is jsmtechnologies at gmail.com
>>>>> 
>>>>> Thanks again for your consideration.
>>>>> 
>>>>> 2012/3/16 <xinchejian at googlegroups.com>
>>>>>> 
>>>>>>  Today's Topic Summary
>>>>>> 
>>>>>> Group: http://groups.google.com/group/xinchejian/topics
>>>>>> 
>>>>>> about Exhibition [3 Updates]
>>>>>> Accessing the kinect from your browser [4 Updates]
>>>>>> SD card question [3 Updates]
>>>>>> 本周日:教育性机器人演示 - This Sunday: Educational Robots show case [1 Update]
>>>>>> 
>>>>>> about Exhibition
>>>>>> 
>>>>>> Infy Zhang <infyzhang at gmail.com> Mar 16 11:13AM +0800
>>>>>> 
>>>>>> They send me this.I don't think I should say that.
>>>>>> I told them Ricky ,Minnin and David are the founder.
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> David Li <taweili at gmail.com> Mar 16 04:09PM +0800
>>>>>> 
>>>>>> :D Now, that's a good question. However, who's Ultra realistic anyway?
>>>>>> 
>>>>>> On Mar 15, 2012, at 5:57 PM, Paul Adams wrote:
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> Paul Adams <nihaopaul at gmail.com> Mar 16 04:10PM +0800
>>>>>> 
>>>>>> lol woops, that was supposed to be a private message :/
>>>>>> 
>>>>>> On Fri Mar 16 16:09:01 2012, David Li wrote:
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> Accessing the kinect from your browser
>>>>>> 
>>>>>> Johnny <seatubers at gmail.com> Mar 16 01:25AM -0400
>>>>>> 
>>>>>> http://zigfu.com/
>>>>>> 
>>>>>> Not much to say except it works and it is awesome.
>>>>>> 
>>>>>> As a side note, has anyone seen any good implementations of 3d
>>>>>> scanning
>>>>>> through depth from focus/defocus algorithms? I've been cobbling
>>>>>> together
>>>>>> something of my own, but I'm wondering if there's already something
>>>>>> out
>>>>>> there that's already good to go.
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 萨克森气势 <sachsenpower at gmail.com> Mar 16 01:55PM +0800
>>>>>> 
>>>>>> Cool but I do not have a Kinec yet :-)
>>>>>> 
>>>>>> About your note: see this. http://www.youtube.com/watch?v=jLZ-s9KRzG8
>>>>>> Not sure if you can get some answer there but it's pretty amazing and
>>>>>> cheap. 3D scanner for less than 25 US$
>>>>>> 
>>>>>> ~Lutz
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 2012/3/16 Johnny <seatubers at gmail.com>
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 萨克森气势 <sachsenpower at gmail.com> Mar 16 02:00PM +0800
>>>>>> 
>>>>>> sorry, i forgot the important thing:
>>>>>> the code: http://code.google.com/p/rp-3d-scanner/
>>>>>> 
>>>>>> ~Lutz
>>>>>> 
>>>>>> 
>>>>>> 2012/3/16 萨克森气势 <sachsenpower at gmail.com>
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> Paul Adams <nihaopaul at gmail.com> Mar 16 02:00PM +0800
>>>>>> 
>>>>>> edward and somone was playing with a simplier one of these in XCj a
>>>>>> few
>>>>>> weeks ago: http://www.youtube.com/watch?v=uC-99bjh2dE&feature=related
>>>>>> 
>>>>>> On Fri Mar 16 13:55:48 2012, 萨克森气势 wrote:
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> SD card question
>>>>>> 
>>>>>> 萨克森气势 <sachsenpower at gmail.com> Mar 16 01:15PM +0800
>>>>>> 
>>>>>> We tried different card readers and also different recovery software.
>>>>>> That's why I am asking for a different solution. I mean, there have to
>>>>>> be
>>>>>> a
>>>>>> way to access the memory without or with an external controller, if
>>>>>> that
>>>>>> is
>>>>>> the issue.
>>>>>> 
>>>>>> ~Lutz
>>>>>> 
>>>>>> 
>>>>>> 2012/3/15 James Koler <jameshkoler at gmail.com>
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> ourstuff888 <ourstuff888 at gmail.com> Mar 16 01:24PM +0800
>>>>>> 
>>>>>> If you can get to the innards and access the chip pins, then maybe
>>>>>> something like this BusPirate can help. It would also help if there
>>>>>> are
>>>>>> visible markings on the chips.
>>>>>> 
>>>>>> See http://dangerousprototypes.com/docs/Bus_Pirate.
>>>>>> 
>>>>>> There are some chip examples here:
>>>>>> http://dangerousprototypes.com/docs/Bus_Pirate#Chip_demonstrations,
>>>>>> that
>>>>>> show how to access some memory & other chips.
>>>>>> 
>>>>>> There are plenty more examples in the forums where people have reverse
>>>>>> engineered stuff and quite a few who half fixed corrupt computer BIOS
>>>>>> etc.
>>>>>> 
>>>>>> I have one and can give you an intro and lend it to you if you want to
>>>>>> try it.
>>>>>> 
>>>>>> Spencer
>>>>>> 
>>>>>> On 16/03/12 13:15, 萨克森气势 wrote:
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 萨克森气势 <sachsenpower at gmail.com> Mar 16 01:46PM +0800
>>>>>> 
>>>>>> Thanks Spencer, i will check this and come back to you :-) That's very
>>>>>> helpful since I really think there is a hardware problem.
>>>>>> 
>>>>>> ~Lutz
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 2012/3/16 ourstuff888 <ourstuff888 at gmail.com>
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 本周日:教育性机器人演示 - This Sunday: Educational Robots show case
>>>>>> 
>>>>>> Min Lin Hsieh <mlhsie at gmail.com> Mar 16 12:21AM +0800
>>>>>> 
>>>>>> 本周日下午2点:教育性机器人演示, 欢迎大小朋友来围观!免费入场喔!
>>>>>> 
>>>>>> 详情:http://xinchejian.com/event/?ee=115
>>>>>> 
>>>>>> 
>>>>>> This Sunday 2pm at XinCheJian (FREE): Educational Robots show case
>>>>>> 
>>>>>> More details here: http://xinchejian.com/event/?ee=115
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Group
>>>>>> xinchejian.
>>>>>> You can post via email.
>>>>>> To unsubscribe from this group, send an empty message.
>>>>>> For more options, visit this group.
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> --
>>>>> 
>>>>> --
>>>>> Sincerely,
>>>>> Jeffrey Scott Rust 胡佳豪
>>>>> 
>>>>> USA  1-585-210-2117
>>>>> China +86-14782102042
>>>>> International QQ Messenger ID 1261660352 http://im.qq.com/
>>>>> 
>>>>> Profile and Wiki
>>>>> https://plus.google.com/108631784091775380095
>>>>> http://ccnetwork.wikispaces.com/   review all pages please
>>>>> 
>>>>> Favorite Projects
>>>>> earthship.net
>>>>> http://opensourceecology.org/wiki/Main_Page
>>>>> http://www.windowfarms.org/buildyourown
>>>> 
>>>> 
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: Jake <jake at spaz.org>
>>>> To: "noisebridge-discuss at lists.noisebridge.net"
>>>> <noisebridge-discuss at lists.noisebridge.net>
>>>> Cc:
>>>> Date: Fri, 16 Mar 2012 23:56:09 -0700 (PDT)
>>>> Subject: [Noisebridge-discuss] WeKnow - Noisebridge's collective
>>>> knowledge in wiki form
>>>> if you go to
>>>> https://noisebridge.net/wiki/Weknow
>>>> 
>>>> you will see a new page dedicated to categorizing Knowledge held by the
>>>> members of the Noisebridge community.
>>>> 
>>>> it's starting out just as a template, but anyone with input to this
>>>> concept should jump right in.
>>>> 
>>>> I put a bunch of stuff about Arduino and Jesse is adding stuff about
>>>> source control and Git, and trying to get the "keep answer hidden until
>>>> clicked upon" function to work in mediawiki.
>>>> 
>>>> -jake
>>>> 
>>>> 
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: Jake <jake at spaz.org>
>>>> To: "noisebridge-discuss at lists.noisebridge.net"
>>>> <noisebridge-discuss at lists.noisebridge.net>
>>>> Cc:
>>>> Date: Sat, 17 Mar 2012 01:12:52 -0700 (PDT)
>>>> Subject: [Noisebridge-discuss] weknow knowledge base
>>>> Hello knowledgeable person,
>>>> 
>>>> so we've made this new wiki page with knowledge of several disciplines.
>>>> The purpose of it is to allow people to find out how much they know (and
>>>> what there is to know), so that they can learn more.  Also, hopefully there
>>>> will be links to people who know things, so that people wanting to learn
>>>> more can know who to ask.
>>>> 
>>>> In each category, we are putting a list of quiz-like questions which have
>>>> corresponding answers.  I think the goal should be to have information about
>>>> these topics in a question-and-answer format so that people can
>>>> 
>>>> I have created a few categories, including:
>>>> 2.1 Arduino Quiz Questions
>>>> 2.2 Soldering
>>>> 2.3 Electronic Components
>>>> 2.4 Replicators and MakerBots
>>>> 2.5 Sewing
>>>> 2.6 Cooking
>>>> 2.7 Version Control / Source Control
>>>> 
>>>> These are topics that I think you know a lot about.  I was hoping you
>>>> could edit the wiki and put questions and answers in there to help this
>>>> thing along.  Eventually, everything known by anyone at noisebridge will be
>>>> on this page (or maybe it will expand to multiple pages) and people will be
>>>> able to instantly orient themselves relative to what there is to know.
>>>> 
>>>> All the questions I created are essay-style, with multiple answers
>>>> listed. The person grading themself (or someone else) can simply learn from
>>>> their answers, or assign a percentage score to each answer to tabulate a
>>>> score in a particular subject.  People knowledgable in these fields can add
>>>> answers to increase the chance that someone will learn from a question, and
>>>> increase the chance that their right answer will correspond to one already
>>>> listed.
>>>> 
>>>> so please - get on the wiki and edit away!
>>>> 
>>>> https://noisebridge.net/wiki/Weknow
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Noisebridge-discuss mailing list
>>>> Noisebridge-discuss at lists.noisebridge.net
>>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>> 
>>> 
>>> _______________________________________________
>>> Noisebridge-discuss mailing list
>>> Noisebridge-discuss at lists.noisebridge.net
>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>> 
>>> 
>>> _______________________________________________
>>> Noisebridge-discuss mailing list
>>> Noisebridge-discuss at lists.noisebridge.net
>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>> 
>> 
>> 
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>> 
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss


More information about the Noisebridge-discuss mailing list