[Noisebridge-discuss] The mill arrived, not ready for use

Mitch Altman maltman23 at hotmail.com
Thu Apr 4 00:49:25 UTC 2013

Thanks, Jim, and everyone who helped!

> From: jim at systemateka.com
> To: noisebridge-discuss at lists.noisebridge.net
> Date: Tue, 2 Apr 2013 18:43:07 -0700
> Subject: [Noisebridge-discuss] The mill arrived, not ready for use
>     The mill arrived this afternoon (thanks jarred, 
> dante, dylan, curtis, and thanks to John at Highland 
> Electronics, who donated the machine. 
>     The mill is in the dirty workshop on palettes 
> beneath the sub-panel, two pieces and a box of parts. 
>     The mill must be mounted on some work surface 
> and we must get some cutting oil and most especially 
> some clamps to hold down "the work". 
>     For those who don't know but care, a mill is 
> a cutting machine for sheet metal (mainly, and maybe 
> other metal parts, depending on the cutting tools 
> and the mill's design). Good machinists use mills 
> properly and have all their fingers and thumbs. 
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/noisebridge-discuss/attachments/20130403/a905e358/attachment.html>

More information about the Noisebridge-discuss mailing list