[Noisebridge-discuss] Next meeting: Things to be repaired (LaserCutter and VinylCutter)
c1 at caseyc.net
Wed Jun 26 03:52:53 UTC 2013
Vinyl cutter is up and running.
On 6/25/13 10:59 AM, Casey Callendrello wrote:
> We have almost a dozen spare blades. Some are in the envelope taped to
> the legs of the vinyl cutter.
> STOP! Read the instructions first! The blades REALLY HATE fingerprint
> oil, so don't touch the tip directly. You will then have to calibrate
> the blade height by cutting a bunch of shitty cuts and fixing it.
> I swear to god if you guys fuck this vinyl cutter up I will fix it,
> cut a big middle finger, then throw the whole thing out the window.
> Hugs and kisses,
> On 6/24/13 8:37 PM, Romy Ilano wrote:
>> There are 2 things to be repaired. I have added them to the next
>> meeting wiki. [I cannot go to the next Noisebridge meeting]
>> The *LaserCutter *
>> It was told to me that we need to replace the USB Microcontroller for
>> the LaserCutter. I don't know much technical stuff but i'm doing what
>> I can to help: I'm looking up what the part is and how much it costs
>> to replace it.
>> * https://noisebridge.net/wiki/Lasercutter#June_2013_-_Fix_the_LaserCutter
>> * Cost: $449 - through Google Wallet, a *RetinaEngrave USB Laser
>> Engraving Processor *from the manufacturer of the lasercutter.
>> * http://www.fullspectrumengineering.com/RetinaEngrave.html
>> The Vinyl Cutter
>> <https://noisebridge.net/wiki/Vinyl_cutter#Latest_News>is broken
>> It was reported to me that the blade needs to be replaced for the
>> vinyl cutter
>> I can't verify it if it's the blade that's broken but if it is the blade:
>> the replacement blades are cheap, only $19.95 and you can buy them here
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Noisebridge-discuss