[Noisebridge-discuss] DIY vario kit

Jonathan Toomim jtoomim at jtoomim.org
Mon Sep 16 18:08:37 UTC 2013


This looks like it might make a good basis for a pretty decent DIY 
vario/flight instrumentation system. Only $25.

https://estore.ti.com/Product3.aspx?ProductId=3192

"The SensorTag works with TI’s TPS62730 (step down converter), and 
includes TI’s TMP006 IR MEMS temperature sensor, humidity sensor, 
pressure sensor, accelerometer, gyroscope and magnetometer."

Use the pressure sensor for altitude, the gyro/accel/mag for vario (and 
possibly, if resolution is good enough and drift is low enough, inertial 
navigation and groundspeed), and temp/humidity for curiosity. Use your 
smartphone for info display, and possibly GPS (to counter drift on the 
SensorTag).

I'll be in California from 9/23 to 11/4, roughly. Anyone want to work on 
this with me?

[Cross-posting this to the Berkeley Hang Gliding Club's list and the 
Noisebridge Discuss list.]

Jonathan


More information about the Noisebridge-discuss mailing list