[Noisebridge-discuss] looking for a ZIF socket programmer for atmega328p atmel chips
maltman23 at hotmail.com
Wed Jan 14 05:47:40 UTC 2015
I program 100 to 500 AVR chips (of various flavors) at a setting for my kits. All DIP. I only use a regular DIP socket and a USBtinyISP. I bend the legs while one is already programming. I insert the chip only halfway into the DIP socket. I think this is actually easier than using a ZIF socket -- no need to push and pull that little handle.
> Date: Tue, 13 Jan 2015 18:46:00 -0800
> From: pp at myelin.co.nz
> To: pdbogen at cernu.us
> CC: jake at spaz.org; sudo-discuss at lists.sudoroom.org; noisebridge-discuss at lists.noisebridge.net; adi at hexapodia.org
> Subject: Re: [Noisebridge-discuss] looking for a ZIF socket programmer for atmega328p atmel chips
> Jake - what package are you looking at? The atmega328p-pu DIP, the
> atmega328p-au TQFP, or one of the more complicated ones?
> Is this for production programming? If it's for dev, can you program
> it in-circuit instead?
> On Tue, Jan 13, 2015 at 5:58 PM, <pdbogen at cernu.us> wrote:
> > You can program them from a serial port as well, albeit very slowly. It's a
> > pretty cool hack:
> > http://avrprogrammers.com/programmers/all-serial-port
> > - Patrick
> > On Tue, Jan 13, 2015 at 05:50:04PM -0800, Andy Isaacson wrote:
> >> On Tue, Jan 13, 2015 at 05:46:39PM -0800, Jake wrote:
> >> > i looked on ebay but couldn't find anything cheap.
> >> >
> >> > isn't there anything in the open sores community?
> >> You can program them with avrdude and a AVRISPmkII and a breadboard.
> >> Even cheaper, it's possible to wire something up with a PC parallel port
> >> or some GPIOs on a rPi, but I haven't seen the wiring diagram for the
> >> latter. (Hey, that would be a cool project for CHM!)
> >> -andy
> >> _______________________________________________
> >> Noisebridge-discuss mailing list
> >> Noisebridge-discuss at lists.noisebridge.net
> >> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
> > --
> > .
> > Patrick Bogen .
> > ...
> > _______________________________________________
> > Noisebridge-discuss mailing list
> > Noisebridge-discuss at lists.noisebridge.net
> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Noisebridge-discuss