[Noisebridge-discuss] SOIC-14 SOT-8 surface mounting reflow oven?

Matt Stone matthew.d.stone at gmail.com
Fri Jul 10 19:44:57 UTC 2015


Oh, and I use this solder paste (which is program P2 on that oven):
http://www.amazon.com/Kester-EP256-Solder-Syringe-Dispenser/dp/B006UTCYM2/ref=sr_1_1?ie=UTF8&qid=1436557477&sr=8-1&keywords=kester+solder+paste

On Fri, Jul 10, 2015 at 12:41 PM, Matt Stone <matthew.d.stone at gmail.com>
wrote:

> I get my solder stencils from oshstencils.com, they are AWESOME.
>
> I bought a precise temperature controlled reflow oven on ebay for $250:
>
> http://www.ebay.com/itm/like/281272854439?lpid=82&chn=ps
>
>
> On Fri, Jul 10, 2015 at 12:39 PM, Cere Misc <cere.misc at gmail.com> wrote:
>
>> So there's this chip that I just gotta have for a project I am working
>> on.  The only problem is that it seems like EVERYTHING in IC form now it
>> packaged in these teensy little surface mount chips.  I don't have a small
>> enough soldering iron and I'd rather not hassle with trying to make it work
>> with my shitty equipment.
>>
>> Wondering if sudo or Noisebridge is set up for a solder reflow oven with
>> an accurate temperature control?  Also, I am not totally clear about how I
>> create a silkscreen soldering setup for a given PCB design.  Does anyone on
>> this list have a lot of experience with this?
>>
>> Thanks,
>> Cere
>>
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/noisebridge-discuss/attachments/20150710/b0d680f7/attachment.html>


More information about the Noisebridge-discuss mailing list