[Noisebridge-discuss] Laser cutter repair bounty

Zach R organicunity at hotmail.com
Sun Jul 12 08:39:50 UTC 2015


I already offered to help with this....I thought Adam (and someone else) got it fixed recently.  If someone will give me the low down on what needs to be done I'm happy to work on it.

and hey, throwing money (and burritos) at poor techs like me definitely can get shit done!


-Zach


________________________________
From: noisebridge-discuss-bounces at lists.noisebridge.net <noisebridge-discuss-bounces at lists.noisebridge.net> on behalf of Rubin Abdi <rubin at starset.net>
Sent: Saturday, July 11, 2015 3:54 PM
To: Henner Zeller
Cc: James Sundquist; NB Discuss
Subject: Re: [Noisebridge-discuss] Laser cutter repair bounty

Do you want to make the laser go? Fill out the fucking Doodle...

https://doodle.com/3rnzd5fy74kfwd9b

On 11 July 2015 at 14:41, Henner Zeller <h.zeller at acm.org<mailto:h.zeller at acm.org>> wrote:
I'd rather you guys organize some time where everyone who wants to help has time (get creative, there are some online find-free-time-slots-for-a-couple of people online. @rubin was using one of these recently).

Money won't get things done, chip in an hour of your work. _That_ would help more getting this done.

I am happy to help, but being alone working on that will take weeks of time here and there.

What needs to be done, and with a few people, that would be doable in an afternoon.
   - check if we have the water pump and air pump in working condition. If not, get new ones.
   - Get a bucket of 5 Gallons of distilled water.
   - Connect the laser tube to the high voltage power supply (as far as I know, the new tube is already in the cutter)000
   - calibrate things, mirrors and stuff.
   - make a free space in the corner of Noisebridge next to the windows, now full of DJ gear.
   - Find a table to put it on permanently.
   - Prepare an outlet in the window where we can connect the blower pipe.
   - Get the software installed somewhere (I think Jarrod has a license key somewhere and we need a windows machine).

-h


On 11 July 2015 at 14:31, jarrod hicks <hicksu at gmail.com<mailto:hicksu at gmail.com>> wrote:

I too will match that.

On Jul 11, 2015 12:32 PM, "James Sundquist" <sundquistjames at gmail.com<mailto:sundquistjames at gmail.com>> wrote:
I will give $20 to anyone who has the laser cutter restored and calibrated at nb.

---
Sent from Boxer | http://getboxer.com<http://d.getboxer.com/1dmRL48>
_______________________________________________
Noisebridge-discuss mailing list
Noisebridge-discuss at lists.noisebridge.net<mailto:Noisebridge-discuss at lists.noisebridge.net>
https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss


_______________________________________________
Noisebridge-discuss mailing list
Noisebridge-discuss at lists.noisebridge.net<mailto:Noisebridge-discuss at lists.noisebridge.net>
https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss



_______________________________________________
Noisebridge-discuss mailing list
Noisebridge-discuss at lists.noisebridge.net<mailto:Noisebridge-discuss at lists.noisebridge.net>
https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss




--
Rubin
rubin at starset.net<mailto:rubin at starset.net>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/noisebridge-discuss/attachments/20150712/d4a5cb54/attachment.html>


More information about the Noisebridge-discuss mailing list