[Noisebridge-discuss] Laser cutter repair bounty

Mitch Altman maltman23 at hotmail.com
Mon Jul 13 02:48:24 UTC 2015


Zach -- please see the email from Henner, copied below, for a list of things that needs to be done. And please see the Doodle sent by Rubin, copied below, to pick a time to meet to fix the lasercutter.



Everyone -- I paid for the laser tube when I was in China. I would very much love to be paid back for it. It cost me:
      Laser tube:  $120.37
      shipping from Shenzhen to SF:  $117.00

Total:  $237.37


Would people be kind enough to pitch in, and help collect for this?


Thanks,

Mitch.


--------------------------------------
From: organicunity at hotmail.com
To: noisebridge-discuss at lists.noisebridge.net
Date: Sun, 12 Jul 2015 08:39:50 +0000
Subject: Re: [Noisebridge-discuss] Laser cutter repair bounty

.ExternalClass P { } 

I already offered to help with this....I thought Adam (and someone else) got it fixed recently. If someone will give me the low down on what needs to be done I'm happy to work on it.

and hey, throwing money (and burritos) at poor techs like me definitely can get shit done!




-Zach







From: noisebridge-discuss-bounces at lists.noisebridge.net  on behalf of Rubin Abdi 
Sent: Saturday, July 11, 2015 3:54 PM
To: Henner Zeller
Cc: James Sundquist; NB Discuss
Subject: Re: [Noisebridge-discuss] Laser cutter repair bounty 



Do you want to make the laser go? Fill out the fucking Doodle... 



https://doodle.com/3rnzd5fy74kfwd9b




On 11 July 2015 at 14:41, Henner Zeller  wrote:


I'd rather you guys organize some time where everyone who wants to help has time (get creative, there are some online find-free-time-slots-for-a-couple of people online. @rubin was using one of these recently). 


Money won't get things done, chip in an hour of your work. _That_ would help more getting this done.





I am happy to help, but being alone working on that will take weeks of time here and there.




What needs to be done, and with a few people, that would be doable in an afternoon.

 - check if we have the water pump and air pump in working condition. If not, get new ones.

 - Get a bucket of 5 Gallons of distilled water.

 - Connect the laser tube to the high voltage power supply (as far as I know, the new tube is already in the cutter)000

 - calibrate things, mirrors and stuff.

 - make a free space in the corner of Noisebridge next to the windows, now full of DJ gear.

 - Find a table to put it on permanently.

 - Prepare an outlet in the window where we can connect the blower pipe.

 - Get the software installed somewhere (I think Jarrod has a license key somewhere and we need a windows machine).




-h








On 11 July 2015 at 14:31, jarrod hicks  wrote:


I too will match that.




On Jul 11, 2015 12:32 PM, "James Sundquist"  wrote:




I will give $20 to anyone who has the laser cutter restored and calibrated at nb.

 ---
 Sent from Boxer | http://getboxer.com

_______________________________________________
 Noisebridge-discuss mailing list
Noisebridge-discuss at lists.noisebridge.net
https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss


 _______________________________________________
 Noisebridge-discuss mailing list
Noisebridge-discuss at lists.noisebridge.net
https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss



 _______________________________________________
 Noisebridge-discuss mailing list
Noisebridge-discuss at lists.noisebridge.net
https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss






-- 

Rubin
rubin at starset.net


_______________________________________________ Noisebridge-discuss mailing list Noisebridge-discuss at lists.noisebridge.net https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/noisebridge-discuss/attachments/20150712/2ed8411a/attachment.html>


More information about the Noisebridge-discuss mailing list