[Noisebridge-discuss] Basic Saftey Instructions for woodshop

jarrod hicks hicksu at gmail.com
Tue Mar 17 05:52:01 UTC 2015


Hello Nir.

It sounds like Torrie has you covered, but you are also welcome to come to
the Maker Faire build night, Thursdays 19:00 to 22:00. It isn't a shop
safety class, but I do teach the tools that we are using during the session
and I can show you where things are in the shop.

This coming Thursday we will be using the table saw and router mostly,
clamps, and maybe the chop saw a little.

On Mon, Mar 16, 2015 at 8:30 PM, Nir Lev <nlev0nlev0 at gmail.com> wrote:

> Hi all,
>
> I would like to work on the different wood-shop machines to build my
> project, but I would like to make sure that I go through some basic safety
> instructions from someone experienced with these machines (before I attempt
> to cut off my fingers like a moron).
>
> If anyone is willing to find some time to give me this basic guidance, I
> would appreciate it very much. I could hopefully declare NB as the workshop
> and community which I'd like to work on my super-special ( ;-) ) project.
>
> Also, if I were to bring my own wood to work on, where would I purchase
> some / grab some lying around for free? :P
>
> Thanks,
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/noisebridge-discuss/attachments/20150316/7fa6106f/attachment.html>


More information about the Noisebridge-discuss mailing list