[Rack] [Noisebridge-discuss] Rack

Dr. Jesus j at hug.gs
Tue Mar 1 09:26:41 PST 2011


I've been negotiating with webpass for the past two weeks now that
they dropped their prices.  They want something like $100/mo for
10mbps symmetric, but there's a 1000 GB/month cap.

PG&E is switching over to the summer rates, so the per-kWh cost is
going up to 19.7 cents/kWh again.  It's only a 34% increase for the
current year's tariff.

Electricity costs are $15 per 30 days per 100 watts at the summer
rate, and about $11 per 30 days per 100 watts at the winter rate.
Internet can be split equally between everyone in the rack.  I have a
limited number of low power cobalt machines I can donate, both x86 and
MIPS.  They all draw under 30 watts including disks.  They're not fast
and they physically do not support LBA48 disks (137 GB limit), but
they're darn cheap to run.  I also have some ARM boards in the
donation pipeline, but since we're the lowest priority for donations
there's no guarantee we'll get any.

We have plenty of network gear, and the rent for the rack is something
like $6/mo at cost assuming it takes up 8sqft.  We could put the rack
in one of the access controlled areas of the building, too.  I'm
already hosting some gear elsewhere in the building and the cooling is
way better than in the closet.

On Tue, Mar 1, 2011 at 8:21 AM, jim <jim at well.com> wrote:
>
>    please consider that we get a higher speed
> connection to the space along with a block of
> static ip addresses so we can rent out rack
> space (to me and others) as well as support
> all noisebridge systems (maybe the renters
> could pay enough to cover the NB systems?).
>    costs include bandwidth, physical space,
> network equipment, and electricity.
>    i'd be willing to scout out others who'd
> be willing to pay rent for rack space.
>
>
>
>
> On Tue, 2011-03-01 at 00:36 -0800, Jonathan Lassoff wrote:
>> On Tue, Mar 1, 2011 at 12:30 AM, Dr. Jesus <j at hug.gs> wrote:
>> > Thanks to everyone who lugged the rack in.
>> >
>> > Here's the deal: it has 2x 12 socket NEMA 5-15R PDUs which terminate
>> > in NEMA 5-15P connectors.  The PDUs seem to be voltage independent,
>> > but the breakers are rated for 15 amps.  It has a standard 19" width
>> > and the usual relay rack taps on all four posts.
>> >
>> > We seem to have a shortage of rack screws; I'll look around to see if
>> > I have any.  I probably don't have enough.
>> >
>> > The rack doesn't fit in the space occupied by the current rack.  It's
>> > possible to make space, but then we're going to have to find somewhere
>> > to put all the fluorescent bulbs hanging out in the server closet.
>> >
>> > There's a big hole in the top and bottom, so no forced air cooling
>> > unless we want to manufacture some plates and fans.
>>
>> This is a pretty awesome-looking rack.
>>
>> I'm happy to purchase some rack screws if anyone knows the right type of screw.
>>
>> I'm also happy to help out if we want to plan a big rack moving day
>> where we move the WiFi service to a temporary AP somewhere else, rip
>> everything out of that closet and build it all up again.
>> It's probably a whole days worth of work to do it all correctly.
>>
>> The only thing I'm concerned about moving is the patch panel. It's
>> only labeled on the front, so cables should be kept attached to this,
>> or numbered, re-fed, and re-terminated.
>>
>> Cheers,
>> jof
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
>
>


More information about the Rack mailing list