[Rack] how to open noisebridge door from computers

Wladyslaw Zbikowski embeddedlinuxguy at gmail.com
Sat Feb 18 08:44:34 PST 2012


Yep, I hope I put it all back together right. If you want to try add
codes the list is /usr/local/share/baron/codes.txt. The daemon reloads
the code file every 10 seconds. It uses Upstart so "sudo service
start/stop baron" will control it.

I also updated some of the connector labels around minotaur; the
configuration is

ttyS0 switch2 console
ttyS1 bikeshed console
ttyS2 apcupsd
ttyS3 noisebridge-baron

Looks like we're ready to set up the phone booth :-)

https://github.com/EmbeddedLinuxGuy/noisebridge-baron

On Sat, Feb 18, 2012 at 2:42 AM, Ben Kochie <ben at nerp.net> wrote:
> Looks like they pulled the wrong cable. :-)
> --
> Sent from my Android phone with K-9 Mail. Please excuse my brevity.
>
> Jonathan Lassoff <jof at thejof.com> wrote:
>>
>> On Fri, Feb 17, 2012 at 7:04 PM, Jake <jake at spaz.org> wrote:
>> > yes me and jesse are working on trying to figure out which serial port
>> > to
>> > use.
>> >
>> >
>> > Broadcast Message from root at minotaur
>> >        (somewhere) at 18:58 ...
>> >
>> > Warning communications lost with UPS susan
>>
>>
>> Um. Uh oh. That seems sketch.
>>
>> Is minotaur still running apcupsd and talking to the UPS. I didn't think
>> so...
>> ________________________________
>>
>> Rack mailing list
>> Rack at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/rack
>
>
> _______________________________________________
> Rack mailing list
> Rack at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/rack
>


More information about the Rack mailing list