[Rack] antenna

Eric Michaud michaud.eric.c at gmail.com
Tue Jun 12 03:10:29 PDT 2012


As per a request by Nick and Miloh,

I just finished crimping and running a length of Ethernet cable from the
Juniper switch for the antennae. I pulled it from the rack, ran across
the ceiling, and dropped the cable next to the PoE injector on the 3d
printer table with about 10 extra feet of cable

I plugged the ethernet cable into port 5 on the Juniper switch. I wanted
to log into the dish and give the AP a noisebridge IP but the default
passwords appear to have been changed.

-E.

On 06/11/2012 02:50 PM, Jonathan Lassoff wrote:
> On Mon, Jun 11, 2012 at 2:34 PM, Nick Owens <mischief at offblast.org> wrote:
>   
>> only eth0 is connect to the nb network. eth1 has nothing on it currently. i
>> did it that way so i could plug another machine into ass rather than finding
>> a working jack or cord.
>>     
> Ah.... that makes sense.
>
> I was confused, as the driver for eth1 was showing the MII as being "up".
>
> --j
> _______________________________________________
> Rack mailing list
> Rack at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/rack
>   


More information about the Rack mailing list