[Rack] can anyone help us connect to port a device 34 on the switch in the rack? is the switch smart enough to tell us more about this device? EOM

miloh froggytoad at gmail.com
Thu Jan 31 03:20:26 UTC 2013


yup, the cisco/linksys one is the right one methinks.

thanks!

On Wed, Jan 30, 2013 at 6:57 PM, Jonathan Lassoff <jof at thejof.com> wrote:
> By "the switch", which one do you mean? The Cisco/Linksys one?
>
> I can log into there and look at the Ethernet bridging table (listing source
> MAC addresses and ports).
> From there, we could compare to the ARP table on the router or another host
> talking to whatever is connected there. That should yield an IP.
>
> However, looking at "g34" (they're numbered g1 - g48), I don't see any
> source MAC addresses being learned:
>
> switch1.noise# show bridge add eth g34
> Aging time is 300 sec
>
>   Vlan        Mac Address       Port     Type
> -------- --------------------- ------ ----------
>
> switch1.noise#
>
> On Mon, Jan 28, 2013 at 11:26 PM, miloh <froggytoad at gmail.com> wrote:
>>
>>
>> _______________________________________________
>> Rack mailing list
>> Rack at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/rack
>
>


More information about the Rack mailing list