[Space] Audio

Greg Stramback grog at piratelabs.com
Thu Mar 18 18:10:59 PDT 2010


I'm making the assumption that we're expecting a certain percentage of
garbled / unreadable packets due to two audio sources being combined?

-g-

On Thu, Mar 18, 2010 at 5:56 PM, Albert Alexander <
albert.alexander at gmail.com> wrote:

> The walkie-talkie is getting audio from two sources. I suggested using a
> splitter to combine the sources, but this will load down the output
> transistors unless we add two resistors in series before the splitter. 10k
> is fine. This will attenuate the current of each signal. We could use a
> summing amp if we want to avoid the attenuation, or we could just turn up
> the volume.
>
> Will test G1 audio out AC coupling tonight after 5moF
>
> _______________________________________________
> Space mailing list
> Space at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/space
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.noisebridge.net/pipermail/space/attachments/20100318/b3103021/attachment.htm 


More information about the Space mailing list