[Tiny-tux] question about flashing SD cards
coreyfro at coreyfro.com
Fri Dec 17 13:44:33 PST 2010
I've been using Kingston Micro SD cards, exclusively. They come with
fullsized SD adapters and a USB adapters, as well. Getting the USB-SD
reader with the SD device adds a little bit of comfort.
On Fri, Dec 17, 2010 at 1:29 PM, Akkana Peck <akkana at shallowsky.com> wrote:
> Alison Chaiken wrote:
> > The working cards always boot and the non-working
> > ones never boot, so the problem is not that the board itself is
> > unreliable.
> Have you ruled out issues like the different types/sizes/formats of
> SD card? A lot of older readers can't handle the newer (e.g. 8G and
> up, or even the intermediate 4G) SD formats. I've had problems like
> that on several embedded SD readers, where old 512M SD cards worked
> fine but some new 4G and 8G cards didn't. I've also hit that on
> very old front-panel desktop multi-format readers.
> Tiny-tux mailing list
> Tiny-tux at lists.noisebridge.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Tiny-tux