[Tiny-tux] TinyTux will resume June 11th
coreyfro at coreyfro.com
Fri Jun 3 12:49:10 PDT 2011
If anyone wants one of these receiver setups, let me know and I'll add them
to my order. Anthony, these will work with your Spektrum Radio from your
On Fri, Jun 3, 2011 at 12:47 PM, Corey McGuire <coreyfro at coreyfro.com>wrote:
> Sorry for the lag. Life is taking it's sweet time...
> BUT! I have a fun project I am going to do and it should be a simple, but
> effective test, of embedded Linux.
> We're going to get any one of the platforms at our disposal and then
> interface it with a standard Hobby/Sport grade Radio Control.
> I posted the following over the weekend on the noisebridge list, and it
> spells out what I wish to do. I have a receiver and its satellite on
> order. I already have the corresponding transmitter. We'll try coding the
> whole damn thing in python to pump out the raw values of the channels in
> We might just ride the coattails of the success of python on chumby, but
> I'd like to do this under Debian/ARM if at all possible.
> ---------- Forwarded message ----------
> From: Corey McGuire <coreyfro at coreyfro.com>
> Date: Tue, May 31, 2011 at 2:15 AM
> Subject: Useful Robot Receiver that speaks Spektrum DSM2
> To: NoiseBridge Discuss <Noisebridge-discuss at lists.noisebridge.net>, Orb
> Swarm <swarm at lee.org>
> New product from hobby king.
> The concept of a "Satellite receiver" (meaning secondary receiver to feed
> data to the primary receiver) is not new. They are used in the quite likely
> event that your RC aircraft is flipping around and it's main antenna's
> polarity no longer matches your transmitter's, thus making your effective
> range drop sharply in an instant. Add a "Satellite receiver" oriented on
> another axis/plane and this problem is lessened.
> Unlike primary receivers, these satellite receivers do not drive servos or
> speak PWM. Instead of 2 to 10 PWM streams as output, they have one PPM
> stream that contains all the information of all the channels on one data
> This means, if you want to control a robot using a pro/hobby grade wireless
> protocol, instead of trying to capture up to 10 different PWM signals
> simultaneously, you only need to capture one PPM signal.
> PPM is standard. All radios output it through their Trainer/DSC ports.
> There are dozens of Arduino projects that speak PPM. Now that we have a
> cheap wireless way to deliver PPM, we can start controlling just about any
> micro-controller with time tested, proven, low latency, highly redundant,
> highly interference resistant, totally brainless, off-the-shelf 2.4GHz hobby
> In other words, Radio Controlled robots just got a whole lot easier,
> cheaper, and more reliable.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Tiny-tux