Laminator

From Noisebridge
Jump to navigation Jump to search
Noisebridge | About | Visit | 272 | Manual | Contact | Guilds | Resources | Events | Projects | 5MoF | Meetings | Donate | (Edit)
Guilds | Meta | Code | Electronics | Fabrication | Games | Sewing | Music | AI | Neuro | Philosophy | Funding | Art | Security | Ham | Brew | Edit
Fabrication | Sewing | 3D Printing | Wood Shop | Metal Shop | SparkleForge | Laser Cutter | Vinyl Cutter | Edit
Wood Shop | Table Saw | Miter Saw | Band Saw | Bench grinder | Disk sander | Drill press | Lathe | Roland CNC Mill | Air compressor | Hand tools | Hacksaws | Drill | Heat gun | Laminator | Parts | Edit

Laminator status unknown, we should get one for around $30 if we don't have one.

Zach knows about them and has videos about repairing them. They are simple devices with a motor, heater / roller, and a thermocoupler (NTC).
For $30-$50 you can get a totally nice one.

Get one that does 5mils (I think almost all of them do) and buy a stack of cheapo lamination sheets for ~$12
He recommends one like this: