Talk:Coffee

From Noisebridge
Jump to navigation Jump to search

http://makeprojects.com/Project/The+Florence+Siphon/1151/1

good stuff - vacuum coffee prep:

"I assembled my funnel, stopper, tubing, filter, and a beaker for the grounds. I filled my flask with preheated water (small burners can take a while to boil 500ml), poured 38g of medium-ground coffee into the beaker, donned my goggles, and lit the burner.

The water began to bubble quickly, and soon went straight up the glass tube and over to the grounds. After about a minute, the flask was nearly empty and I extinguished the flame. At this point, there was an abundance of expanded water vapor (steam) inside the flask, which prevented the water from returning.

I stirred up the slurry with a stick and then waited with great excitement. Would the siphon be able to draw the coffee back up? At just about the 2-minute mark, I saw the gorgeous brown liquid begin its ascent. This is due to the vacuum created by the cooling and contraction of water vapor in the boiling flask. It was tentative at first, but as the boiling flask continued to cool, the coffee started to move quickly up the tube, over and then back down to the flask below. Within another 20 seconds, the journey was complete: 420ml of coffee made it back, leaving 80ml of water behind with the grounds."